|
Dokumentti- tunnus Komitea / Numero / Tyyppi |
Lausunto-aika päättyy |
Linkkin dokumenttiin |
Otsikko |
Muut komiteat |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
C/1717/RM |
2012-02-24 |
PDF (english) (2 300 kB) |
Unconfirmed report on the Council meeting held in Melbourne on 28 October 2011 |
|
|
|
C/1715/DV |
2012-03-16 |
PDF (english) (536 kB) |
Revised IEC Guide 109 Edition 3: Environmental Aspects - Inclusion in Electrotechnical Product Standards |
|
|
|
C/1719/DV |
2012-05-25 |
PDF
(english) |
Document for NC vote: Draft ISO/IEC Guide 98-4, Evaluation of measurement data - The role of measurement uncertainty in conformity assessment (Revision of JCGM 106) |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
Conformity Assesment Board |
|||
|
CABPUB/59/CD |
2012-03-16 |
PDF (english) (533 kB) |
ISO/IEC CD 17067: Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes |
|
|
|
|
0000-00-00 |
||||
|
1/2183/CDV |
2012-02-17 |
PDF (bilingual) (560 kB) |
IEC 600-50-114: International Electrotechnical Vocabulary - Part 114: Electrochemistry |
25 |
|
|
1/2196/CDV |
2012-04-20 |
PDF (english) (572 kB) |
International Electrotechnical Vocabulary - Part 651: Live working |
78 |
|
|
|
0000-00-00 |
||||
|
2/1639/CDV |
2012-02-17 |
PDF (english) (973 kB), PDF (french) (922 kB) |
IEC 60034-28 Ed 2: Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
|
|
|
2/1645/CD |
2012-02-24 |
PDF (english) (675 kB) |
IEC 60034-23 Ed.1: Rotating electrical machines - Part 23: Specification for the refurbishment of rotating electrical machines |
|
|
|
2/1648/CD |
2012-03-09 |
PDF (english) (1 220 kB) |
IEC 60034-2-1 Ed.2: Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
|
|
|
2/1651/CD |
2012-03-16 |
PDF (english) (516 kB) |
IEC 60034-27-3 TS Ed.1: Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines |
|
|
|
2/1652/CD |
2012-03-23 |
PDF (english) (405 kB) |
IEC 60034-30 Ed 2.0:Rotating electrical machines: Part 30: Efficiency classes of single-speed,three-phase, cage-induction motors (IE-code) |
|
|
|
2/1654/CD |
2012-04-13 |
PDF (english) (684 kB) |
IEC 60034-18-41 Ed.1: Rotating electrical machines - Part 18-41: Qualification and quality control tests for partial discharge free (Type I) electrical insulation systems used in rotating electrical machines fed from voltage converters |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
3/1079/DTS |
2012-03-02 |
PDF (english) (304 kB) |
Guidelines for product committees for the preparation and processing of source definitions for Data Element Types |
|
|
|
3/1079A/DTS |
2012-03-02 |
PDF (english) (308 kB) |
Revised Guidelines for product committees for the preparation and processing of source definitions for Data Element Types |
1, 2, 7, 11, 14, 15, 17, 20, 21, 22, 23, 25, 29, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 42, 44, 46, 47, 48, 49, 51, 55, 56, 57, 68, 70, 85, 86, 87, 88, 91, 95, 96, 99, 101, 103 |
|
|
3/1080/DTS |
2012-03-02 |
PDF (english) (513 kB) |
IEC/TR 62771 Ed.1: Information model covering the contents of IEC 81346-1 and -2, IEC 61175, IEC 61666 and IEC 81714-3 |
|
|
|
3/1084/CDV |
2012-05-25 |
PDF (english) (639 kB), PDF (french) (578 kB) |
IEC 60848 Ed. 3: GRAFCET specification language for sequential function charts |
|
|
|
|
0000-00-00 |
||||
|
3C/1756/CDV |
2012-02-24 |
PDF (english) (102 kB) |
IEC 60417-C00182/Ed.1 Graphical symbols for country of manufacture and model number |
108 |
|
|
3C/1775/CD |
2012-04-20 |
PDF (english) (601 kB) |
IEC 60417-6156, Graphical symbol for use on equipment - Pb-free |
91 |
|
|
3C/1768/CDV |
2012-04-27 |
PDF (english) (196 kB) |
IEC 60417-C00217/Ed.1: Four graphcial symbols for use on office equipment, information technology equipment, and keyboards |
|
|
|
3C/1769/CDV |
2012-04-27 |
PDF (english) (445 kB), PDF (french) (445 kB) |
IEC 60417-C00218/Ed.1: 13 Graphcial symbols for space for use on office equipment, information technology equipment, and keyboards |
|
|
|
3C/1770/CDV |
2012-04-27 |
PDF (english) (195 kB), PDF (french) (256 kB) |
IEC 60417-C00222/Ed.1: Four graphcial symbols for jointer for use on office equipment, information technology equipment, and keyboards |
|
|
|
3C/1767/DC |
2012-12-23 |
PDF (english) (147 kB) |
NP on Information technology - User interfaces - Keyboards - Specification of non-text-related-function-key symbols in the keyboard standard ISO/IEC 9995-7 (JTC 1/SC 35) |
|
|
|
|
0000-00-00 |
||||
|
3D/191/CDV |
2012-02-10 |
PDF (english) (1 549 kB), PDF (french) (1 671 kB) |
IEC 62656-1:Standardized product ontology register and transfer by spreadsheets -Part1: logical structure for data parcels |
17B, 57, 65E, 111 |
|
|
|
0000-00-00 |
||||
|
4/265/CDV |
2012-02-03 |
PDF (english) (342 kB), PDF (french) (331 kB), ZIP (english) (234 kB) |
IEC 62097 A1 Ed. 1.0: Hydraulic machines, radial and axial - Performance conversion method from model to prototype |
114 |
|
|
4/270/FDIS |
2012-02-24 |
PDF (english) (1 378 kB), PDF (french) (1 250 kB) |
IEC 61362 Ed. 2.0: Guide to specification of hydraulic turbine governing systems |
2, 57, 114 |
|
|
|
0000-00-00 |
||||
|
5/161/Q |
2012-03-02 |
WORD (english) (69 kB), PDF (english) (23 kB) |
Questionnaire to approve maintenance of IEC 60045 Ed. 1.0, (Specifications), IEC 60953-1, 2, 3 Ed. 1.0 (Acceptance tests) and IEC 61370 TS Ed. 1.0 (Steam purity) |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
9/1612/CD |
2012-02-17 |
PDF (english) (213 kB) |
IEC 61881-3 A1 Ed.1: Amendment 1 to IEC 61881-3 Ed.1: Railway application - Rolling stock equipment - Capacitors for Power electronic - Part 3: Electric double-layer capacitors |
|
|
|
9/1613/CD |
2012-02-17 |
PDF (english) (544 kB) |
IEC 62695 Ed.1: Railway applications - Fixed installations - Traction transformers |
|
|
|
9/1598/CDV |
2012-03-16 |
PDF (english) (391 kB), PDF (french) (368 kB) |
IEC 62718 Ed.1: Railway applications -Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps |
34 |
|
|
9/1628/DC |
2012-04-06 |
PDF (english) (431 kB) |
Questionnaire and call for experts and project leader regarding EN 50467: Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
|
|
|
9/1614/CDV |
2012-04-27 |
PDF (english) (312 kB), PDF (french) (323 kB) |
IEC 60494-1 Ed.2: Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main lines vehicles |
|
|
|
9/1615/CDV |
2012-04-27 |
PDF (english) (421 kB), PDF (french) (434 kB) |
IEC 60494-2 Ed.2: Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
|
|
|
9/1616/CDV |
2012-04-27 |
PDF (english) (1 914 kB), PDF (french) (2 136 kB) |
IEC 61375-3-4 Ed.1: Electronic railway equipment - Train bus - Part 3-4: ECN - Ethernet Consist Network |
|
|
|
9/1630/CD |
2012-04-27 |
PDF
(english) |
IEC 62580-1 Ed.1: Electronic Railway Equipment - Onboard Multimedia and telematic applications for Railways - Part 1: General Architecture |
100 |
|
|
9/1626/DC |
2012-05-18 |
PDF (english) (78 kB) |
Questions from TC 64 concerning the d.c. inrush current |
|
|
|
9/1629/CDV |
2012-06-29 |
PDF (english) |
IEC 61375-2-5 Ed.1: Electronic railway equipment - Train backbone - Part 2-5: Ethernet Train Backbone |
65C |
|
|
|
0000-00-00 |
||||
|
10/881/FDIS |
2012-02-03 |
PDF (english) (169 kB), PDF (french) (243 kB) |
IEC 61181 A1 Ed.2: Amendment 1 to IEC 61181 Ed.2: Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
|
|
|
10/879/NP |
2012-03-02 |
PDF (english) (577 kB) |
Future IEC 6XXXX Ed. 1: Analysis of dissolved and suspended metals in mineral insulating oil |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
EQUIPMENT FOR ELECTRICAL ENERGY MEASUREMENT AND LOAD CONTROL |
|||
|
13/1494A/DC |
2012-02-03 |
PDF (english) (85 kB) |
Revised Proposal for a new Technical Report and Call for experts: Harmonisation DLMS/COSEM - CIM: Translation between CIM (IEC 61968) and DLMS/COSEM (IEC 62056) data models and message profiles (E-mail address has been corrected) |
|
|
|
13/1496/DC |
2012-03-30 |
PDF (english) (72 kB) |
Revision of the Scope |
|
|
|
13/1497/DC |
2012-03-30 |
PDF (english) (81 kB) |
Stability dates of IEC TC13 publications |
|
|
|
13/1498/NP |
2012-04-27 |
PDF
(english) |
IEC 62056-5-3-8, ELECTRICITY METERING DATA EXCHANGE - Part 5-3-8 Smart Message Language SML |
|
|
|
|
0000-00-00 |
||||
|
14/710/FDIS |
2012-02-17 |
PDF (english) (413 kB) |
IEC 62032 Ed.2: Application, Specification and Testing of Phase-shifting Transformers (IEEE Std C57.135-2011) |
|
|
|
14/712/DC |
2012-04-13 |
PDF (english) (123 kB) |
Proposed joint IEC/IEEE revision of IEC 60076-16, Transformers for wind turbine applications |
|
|
|
|
0000-00-00 |
||||
|
15/646/CDV |
2012-02-03 |
PDF (english) (516 kB), PDF (french) (449 kB) |
IEC 61212-3-2 Ed. 3.0: Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes |
112 |
|
|
15/648/CD |
2012-02-03 |
PDF (english) (213 kB) |
IEC 60684-3-285 Ed. 1.0: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation |
112 |
|
|
15/654/Q |
2012-02-03 |
WORD (english) (51 kB), PDF (english) (19 kB) |
Questionnaire to approve maintenance of IEC 60684-3-280 Ed. 1.0 and IEC 60684-3-283 Ed. 1.0 |
|
|
|
15/650/CD |
2012-02-10 |
PDF (english) (481 kB) |
IEC 60455-2 Ed. 3.0: Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
112 |
|
|
15/653/CD |
2012-03-16 |
PDF (english) (66 kB) |
IEC 60684-3-216 A2 Ed. 1.0: Flexible insulating sleeving- Part 3: Specifications for individual types of sleeving - Sheet 216 : Heat-shrinkable, flame retarded, limited fire hazard sleeving |
112 |
|
|
15/647/CDV |
2012-03-30 |
PDF (english) (215 kB), PDF (french) (221 kB) |
IEC 60626-3 A1 Ed. 3.0: Combined flexible materials for electrical insulation - Part 3: Specification for individual materials |
112 |
|
|
15/651/CDV |
2012-04-20 |
PDF (english) (239 kB), PDF (french) (245 kB) |
IEC 60455-3-8 Ed. 1.0: Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resinous compounds for cable accessories |
112 |
|
|
15/655/NP |
2012-04-20 |
PDF (english) (293 kB) |
Future IEC 60684-3-284 Ed. 1.0: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable, sleevings, for oil barrier applications |
|
|
|
|
0000-00-00 |
BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION |
|||
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
17A/993/CD |
2012-03-02 |
PDF (english) (4 194 kB) |
IEC/IEEE 62271-37-013 Ed 1.0: High-voltage switchgear and controlgear - Part 37-013: Alternating-current generator circuit-breakers |
|
|
|
17A/995/DC |
2012-03-02 |
WORD (english) (30 kB), PDF (english) (172 kB) |
Proposed amendment to IEC 62271-109 |
33 |
|
|
17A/994/CDV |
2012-05-25 |
PDF (english) (326 kB), PDF (french) (335 kB) |
Amendment 2 to IEC 62271-102: High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches (Addition of 1100 kV and 1200 kV) |
|
|
|
17B |
|
0000-00-00 |
|||
|
17B/1754/CDV |
2012-03-02 |
PDF (english) (382 kB), PDF (french) (407 kB) |
IEC 62683 Ed.1: Low-voltage switchgear and controlgear - Product data and properties for information exchange |
3D, 22G, 23E, 65E |
|
|
17B/1761/CD |
2012-03-02 |
PDF (english) (257 kB) |
IEC 60947-6-1 am1 Ed.2: Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment |
|
|
|
|
0000-00-00 |
HIGH-VOLTAGE PREFABRICATED SWITCHGEAR AND CONTROLGEAR ASSEMBLIES |
|||
|
17C/540/Q |
2012-02-10 |
PDF (english) (56 kB) |
Merging Documents IEC 61243-5 of TC 78 with IEC 62271-206 of SC 17C |
|
|
|
17C/540A/Q |
2012-02-10 |
PDF (english) (282 kB) |
Merging Documents IEC 61243-5 of TC 78 with IEC 62271-206 of SC 17C |
|
|
|
17C/542/FDIS |
2012-03-30 |
PDF (english) |
IEC 62271-207 ed.2: High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
|
|
|
17C/544/CD |
2012-04-27 |
PDF
(english) |
IEC 62271-211 Ed.1: High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
|
|
|
|
0000-00-00 |
||||
|
17D/449/CDV |
2012-05-11 |
PDF (english) (336 kB), PDF (french) (349 kB) |
IEC 61439-7 Ed. 1: Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific installations at public sites such as marinas, camping sites, market squares and similar applications and for charging stations for Electrical Vehicles |
69 |
|
|
|
0000-00-00 |
ELECTRICAL INSTALLATIONS OF SHIPS AND OF MOBILE AND FIXED OFFSHORE UNITS |
|||
|
18/1240/FDIS |
2012-02-17 |
PDF (english) (889 kB) |
IEC 61892-2 Ed. 2: Mobile and fixed offshore units - Electrical installations - Part 2: System design |
2, 14, 17B, 17C, 18A, 20, 22, 73, 77, 91 |
|
|
18/1241/FDIS |
2012-02-17 |
PDF (english) (764 kB) |
IEC 61892-3 Ed. 3: Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
2, 14, 17B, 17C, 18A, 20, 22, 73, 77, 91 |
|
|
18/1228/CD |
2012-12-02 |
PDF (english) (800 kB) |
IEC 60092-100-3: Electrical installations in ships - Part 100-3: General - Control and Automation |
17C, 17D, 18A, 21, 21A, 27, 31, 31J, 64, 77, 80 |
|
|
18/1230/CD |
2012-12-02 |
PDF (english) (694 kB) |
IEC 60092-100-4 Electrical installations in ships - Part 100-4: General - Equipment, additional requirements |
17C, 17D, 18A, 21, 21A, 27, 31G, 31, 31J, 64, 77, 80 |
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
20/1279/FDIS |
2012-02-10 |
PDF (english) (447 kB), PDF (french) (468 kB) |
IEC 60811-100 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General |
|
|
|
20/1280/FDIS |
2012-02-10 |
PDF (english) (614 kB), PDF (french) (633 kB) |
IEC 60811-201 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
|
|
|
20/1281/FDIS |
2012-02-10 |
PDF (english) (620 kB), PDF (french) (618 kB) |
IEC 60811-202 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
|
|
|
20/1282/FDIS |
2012-02-10 |
PDF (english) (408 kB), PDF (french) (404 kB) |
IEC 60811-203 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
|
|
|
20/1283/FDIS |
2012-02-10 |
PDF (english) (414 kB), PDF (french) (431 kB) |
IEC 60811-301 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
|
|
|
20/1284/FDIS |
2012-02-10 |
PDF (english) (414 kB), PDF (french) (409 kB) |
IEC 60811-302 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
|
|
|
20/1285/FDIS |
2012-02-10 |
PDF (english) (833 kB), PDF (french) (924 kB) |
IEC 60811-401 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven |
|
|
|
20/1286/FDIS |
2012-02-10 |
PDF (english) (456 kB), PDF (french) (443 kB) |
IEC 60811-402 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
|
|
|
20/1287/FDIS |
2012-02-10 |
PDF (english) (474 kB), PDF (french) (461 kB) |
IEC 60811-403 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
|
|
|
20/1288/FDIS |
2012-02-10 |
PDF (english) (405 kB), PDF (french) (422 kB) |
IEC 60811-404 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
|
|
|
20/1289/FDIS |
2012-02-10 |
PDF (english) (395 kB), PDF (french) (410 kB) |
IEC 60811-405 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
|
|
|
20/1290/FDIS |
2012-02-10 |
PDF (english) (538 kB), PDF (french) (558 kB) |
IEC 60811-406 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
|
|
|
20/1291/FDIS |
2012-02-10 |
PDF (english) (612 kB), PDF (french) (422 kB) |
IEC 60811-407 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
|
|
|
20/1292/FDIS |
2012-02-10 |
PDF (english) (468 kB), PDF (french) (445 kB) |
IEC 60811-408 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
|
|
|
20/1293/FDIS |
2012-02-10 |
PDF (english) (526 kB), PDF (french) (546 kB) |
IEC 60811-409 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
|
|
|
20/1294/FDIS |
2012-02-10 |
PDF (english) (436 kB), PDF (french) (453 kB) |
IEC 60811-410 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
|
|
|
20/1295/FDIS |
2012-02-10 |
PDF (english) (404 kB), PDF (french) (408 kB) |
IEC 60811-411 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
|
|
|
20/1296/FDIS |
2012-02-10 |
PDF (english) (405 kB), PDF (french) (423 kB) |
IEC 60811-412 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
|
|
|
20/1297/FDIS |
2012-02-10 |
PDF (english) (664 kB), PDF (french) (605 kB) |
IEC 60811-501 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
|
|
|
20/1298/FDIS |
2012-02-10 |
PDF (english) (403 kB), PDF (french) (418 kB) |
IEC 60811-502 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
|
|
|
20/1299/FDIS |
2012-02-10 |
PDF (english) (403 kB), PDF (french) (440 kB) |
IEC 60811-503 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
|
|
|
20/1300/FDIS |
2012-02-10 |
PDF (english) (617 kB), PDF (french) (657 kB) |
IEC 60811-504 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
|
|
|
20/1301/FDIS |
2012-02-10 |
PDF (english) (449 kB), PDF (french) (466 kB) |
IEC 60811-505 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
|
|
|
20/1302/FDIS |
2012-02-10 |
PDF (english) (540 kB), PDF (french) (557 kB) |
IEC 60811-506 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
|
|
|
20/1303/FDIS |
2012-02-10 |
PDF (english) (419 kB), PDF (french) (437 kB) |
IEC 60811-507 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
|
|
|
20/1304/FDIS |
2012-02-10 |
PDF (english) (787 kB), PDF (french) (795 kB) |
IEC 60811-508 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths |
|
|
|
20/1305/FDIS |
2012-02-10 |
PDF (english) (406 kB), PDF (french) (424 kB) |
IEC 60811-509 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for Resistance of insulations and sheaths to cracking (heat shock test) |
|
|
|
20/1306/FDIS |
2012-02-10 |
PDF (english) (415 kB), PDF (french) (430 kB) |
IEC 60811-510 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
|
|
|
20/1307/FDIS |
2012-02-10 |
PDF (english) (464 kB), PDF (french) (461 kB) |
IEC 60811-511 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds |
|
|
|
20/1308/FDIS |
2012-02-10 |
PDF (english) (414 kB), PDF (french) (429 kB) |
IEC 60811-512 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Tensile strength and elongation at break after conditioning at elevated temperature - Methods specific to polyethylene and polypropylene compounds |
|
|
|
20/1309/FDIS |
2012-02-10 |
PDF (english) (413 kB), PDF (french) (429 kB) |
IEC 60811-513 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
|
|
|
20/1310/FDIS |
2012-02-10 |
PDF (english) (826 kB), PDF (french) (843 kB) |
IEC 60811-601 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
|
|
|
20/1311/FDIS |
2012-02-10 |
PDF (english) (400 kB), PDF (french) (416 kB) |
IEC 60811-602 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
|
|
|
20/1312/FDIS |
2012-02-10 |
PDF (english) (416 kB), PDF (french) (433 kB) |
IEC 60811-603 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
|
|
|
20/1313/FDIS |
2012-02-10 |
PDF (english) (392 kB), PDF (french) (408 kB) |
IEC 60811-604 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
|
|
|
20/1314/FDIS |
2012-02-10 |
PDF (english) (435 kB), PDF (french) (453 kB) |
IEC 60811-605 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
|
|
|
20/1315/FDIS |
2012-02-10 |
PDF (english) (418 kB), PDF (french) (436 kB) |
IEC 60811-606 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
|
|
|
20/1316/FDIS |
2012-02-10 |
PDF (english) (413 kB), PDF (french) (433 kB) |
IEC 60811-607 Ed. 1: Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
|
|
|
20/1319/CD |
2012-03-16 |
PDF (english) (351 kB) |
IEC 60885-3 Ed. 2: Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cables |
|
|
|
20/1321/CD |
2012-03-23 |
PDF (english) (152 kB) |
Amendment 1 to IEC 62230 Ed. 1: Electric cables - Spark-test method |
|
|
|
|
0000-00-00 |
||||
|
21/769/CDV |
2012-05-04 |
PDF (english) (329 kB), PDF (french) (350 kB) |
IEC 60952-1 Ed.3: Aircraft batteries - Part 1: General test requirements and performance levels |
|
|
|
21/770/CDV |
2012-05-04 |
PDF (english) (411 kB), PDF (french) (420 kB) |
IEC 60952-2 ed.3: Aircraft batteries - Part 2: Design and construction requirements |
|
|
|
21/771/CDV |
2012-05-04 |
PDF (english) (205 kB), PDF (french) (171 kB) |
IEC 60952-3 Ed.3: Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP) |
|
|
|
|
0000-00-00 |
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES |
|||
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
POWER ELECTRONICS FOR ELECTRICAL TRANSMISSION AND DISTRIBUTION SYSTEMS |
|||
|
22F/273/CD |
2012-03-16 |
PDF (english) (287 kB) |
IEC 62751-1 Ed.1: Determination of power losses in voltage sourced converter (VSC) for HVDC systems - Part 1: General requirements |
115 |
|
|
22F/272/CD |
2012-04-13 |
PDF (english) (162 kB) |
Amendment 1 - IEC/TR 62543 Ed.1: High-voltage direct current (HVDC) transmission using voltage sourced converters (VSC) |
115 |
|
|
22F/271/CD |
2012-05-18 |
PDF (english) (251 kB) |
Amendment 1 - IEC 62501 Ed.1: Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing |
115 |
|
|
|
0000-00-00 |
SEMICONDUCTOR POWER CONVERTERS FOR ADJUSTABLE SPEED ELECTRIC DRIVE SYSTEMS |
|||
|
|
0000-00-00 |
||||
|
22H/148/CDV |
2012-05-25 |
PDF (english) (241 kB) |
Amendment 1 to IEC 62040-1: Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS |
|
|
|
|
0000-00-00 |
||||
|
23/572/CD |
2012-03-02 |
PDF (english) (360 kB) |
IEC/TR 61916 Frag 1: Electrical accessories - Harmonization of general rules (Proposal on material selection) |
|
|
|
23/573/CD |
2012-03-02 |
PDF (english) (319 kB) |
IEC/TR 61916 Frag 2: Electrical accessories - Harmonization of general rules (Proposal on UV resistance) |
|
|
|
23/574/CD |
2012-03-02 |
PDF (english) (264 kB) |
IEC/TR 61916 Frag 3: Electrical accessories - Harmonization of general rules (Other issues) |
|
|
|
|
0000-00-00 |
||||
|
23A/644/CD |
2012-03-02 |
PDF (english) (85 kB) |
IEC 61386-1 Amd 1 Ed.2: Conduit systems for cable management - Part 1: General requirements |
|
|
|
23A/645/CDV |
2012-06-15 |
PDF (english) (362 kB), PDF (french) (173 kB) |
IEC 61534-21 Ed.2: Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting |
|
|
|
|
0000-00-00 |
||||
|
23B/1037/CD |
2012-02-03 |
PDF (english) (1 011 kB) |
Amendment 2 to IEC 60669-2-1: Ed4: Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches |
34, 34A |
|
|
23B/1043/DC |
2012-02-24 |
PDF (english) (85 kB) |
Proposal for amendment to IEC 60670-22 |
|
|
|
23B/1046/DC |
2012-02-24 |
PDF (english) (121 kB) |
Proposal for the maintenance of IEC 60670-1 - OSM question |
|
|
|
23B/1042/CD |
2012-03-02 |
PDF (english) (98 kB) |
Amendment 1 to IEC 60670-22: Ed.1: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures |
|
|
|
23B/1045/CD |
2012-03-02 |
PDF (english) (221 kB) |
Amendment 2 to IEC 60670-1 Ed 1.1: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements |
|
|
|
23B/1048/CD |
2012-03-02 |
PDF (english) (85 kB) |
Amendment 1 to IEC 60670-21 Ed.1: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means |
|
|
|
23B/1050/CD |
2012-03-02 |
PDF (english) (87 kB) |
Amendment 1 to IEC 60670-23 Ed.1: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures |
|
|
|
23B/1051/CDV |
2012-05-11 |
PDF (english) (220 kB), PDF (french) (231 kB) |
IEC 60884-2-7 A1 Ed.1: Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
23E/740/FDIS |
2012-03-16 |
PDF (english) (640 kB), PDF (french) (682 kB) |
Amendment 1 to IEC 61008-1 ed.3: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
17B |
|
|
23E/741/FDIS |
2012-03-16 |
PDF (english) (662 kB), PDF (french) (697 kB) |
Amendment 1 to IEC 61009-1 ed.3: Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules |
17B |
|
|
23E/737/DC |
2012-04-06 |
PDF (english) (373 kB) |
Proposal for a TS: RCDs associated with additional functions or incorporated in equipment |
|
|
|
23E/738/DC |
2012-04-06 |
PDF (english) (237 kB) |
Revision of 61008 - DC proposal after the meeting in Korea |
|
|
|
23E/739/DC |
2012-04-06 |
PDF (english) (236 kB) |
Revision of 61009 - DC proposal after the meeting in Korea |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
23H/275/FDIS |
2012-02-24 |
PDF (english) (245 kB), PDF (french) (275 kB) |
Amendment 2 to IEC 60309-2: Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional compatibility and interchangeability requirements for pin and contact-tube accessories up to 125 A 690 V |
|
|
|
23H/276/FDIS |
2012-02-24 |
PDF (english) (190 kB), PDF (french) (206 kB) |
Amendment 1 to IEC 60309-4: Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock |
|
|
|
23H/272/DC |
2012-03-02 |
PDF (english) (66 kB) |
Plugs, socket-outlets and couplers for Electric Vehicles (EV) - IEC 62196 series |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
25/443/NP |
2012-03-09 |
PDF (english) (150 kB) |
Split of Diagnosis (Nosology) and Prognosis (Pharmacology) in the ISO/IEC 80003 series towards three new Parts: IEC 80003-9 (Biopharmacology), IEC 80003.10 (Culturopharmacology) and IEC 80003-11 (Psychopharmacology) |
|
|
|
|
0000-00-00 |
||||
|
26/466/CD |
2012-02-17 |
PDF (english) (899 kB) |
IEC 60974-10 ed.3: Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements |
|
|
|
26/469/NP |
2012-03-02 |
PDF (english) (1 859 kB) |
PNW 26-469: Basic standard for evaluation methods for equipment for arc welding and allied processes related to human exposure restrictions for electromagnetic fields |
106 |
|
|
26/470/NP |
2012-03-02 |
PDF (english) (696 kB) |
PNW 26-470: Product family standard for the assessment of equipment for resistance welding, arc welding and allied processes related to human exposure restrictions for electromagnetic fields (0Hz - 300 GHz) |
106 |
|
|
26/468/CDV |
2012-04-27 |
PDF (english) (339 kB), PDF (french) (318 kB) |
IEC 60974-5 Ed.3: Arc welding equipment - Part 5: Wire feeders |
|
|
|
|
0000-00-00 |
||||
|
27/844/CD |
2012-02-03 |
PDF (english) (2 133 kB) |
IEC 62395-1 Ed.2: Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements |
|
|
|
27/845/CD |
2012-02-03 |
PDF (english) (3 310 kB) |
IEC 62395-2 Ed.1: Electrical resistance trace heating systems for industrial and commercial applications - Part 2:Application guide for system design, installation and maintenance |
|
|
|
27/846/DC |
2012-02-10 |
PDF (english) (94 kB) |
Review of IEC 60397 - Call for comments/proposals and for experts to MT 19 |
|
|
|
27/852/Q |
2012-03-02 |
WORD (english) (41 kB), PDF (english) (90 kB) |
Nomination of a new Convenor of TC 27/MT 18 |
|
|
|
27/848/NP |
2012-03-23 |
PDF (english) (186 kB) |
PNW 27-848: Energy efficiency in electroheating installations |
|
|
|
27/849/NP |
2012-04-06 |
PDF (english) (391 kB) |
PNW 27-849: Industrial electroheating equipment - Test methods for infrared emitters |
|
|
|
|
0000-00-00 |
||||
|
28/206/Q |
2012-02-10 |
PDF (english) (629 kB) |
Invitation to TC 28 to nominate a representative to ACTAD |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
29/748/CDV |
2012-03-02 |
PDF (english) (596 kB), PDF (french) (659 kB) |
IEC 61260-1 ed.1: Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
|
|
|
29/752/CDV |
2012-04-13 |
PDF (english) (1 397 kB), PDF (french) (1 345 kB) |
IEC 61094-8 Ed.1: Electroacoustics - Measurement microphones - Part 8: Methods for free-field calibration of working standard microphones by comparison |
|
|
|
|
0000-00-00 |
||||
|
31/974/CD |
2012-02-17 |
PDF (english) (579 kB) |
IEC/IEEE 60079-30-1 Ed. 1.0: Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General, type testing and design requirements |
|
|
|
31/969/CD |
2012-03-02 |
PDF (english) (236 kB) |
IEC 60079-26 Ed. 3.0: Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga |
|
|
|
31/970/NP |
2012-03-16 |
PDF (english) (483 kB) |
Future IEC 60079-XX Ed. 1.0: Explosive atmospheres - Requirements for Process Sealing Between Flammable or Combustible Process Fluids and Electrical Systems. |
|
|
|
31/973/CD |
2012-03-16 |
PDF (english) (2 001 kB) |
IEC 60079-7 Ed. 5.0: Explosive atmospheres - Part 7: Equipment protection by increased safety 'e' |
|
|
|
31/976/CD |
2012-04-13 |
PDF (english) (370 kB) |
IEC 60079-5 Ed. 4.0: Explosive atmospheres - Part 5: Equipment protection by powder filling ""q"" |
|
|
|
31/978/CD |
2012-04-13 |
PDF (english) (356 kB) |
IEC 60079-6 Ed. 4.0: Explosive atmospheres - Part 6: Equipment protection by oil immersion ""o"" |
|
|
|
31/980/CD |
2012-04-13 |
PDF (english) (650 kB) |
IEC 60079-29-2 Ed. 2.0: Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
|
|
|
31/962/CDV |
2012-04-20 |
PDF (english) (883 kB), PDF (french) (998 kB) |
IEC 60079-2 Ed. 6.0: Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures ""p"" |
|
|
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
CLASSIFICATION OF HAZARDOUS AREAS AND INSTALLATION REQUIREMENTS |
|||
|
31J/204/DC |
2012-03-02 |
PDF (english) (366 kB) |
Revision of IEC 60079-10-2 ed1.0 (2009-04): Explosive atmospheres - Part 10-2: Classification of areas - Combustible dust atmospheres |
|
|
|
|
|
Non-electrical equipment and protective systems for explosive atmospheres |
|
||
|
|
0000-00-00 |
||||
|
|
0000-00-00 |
|