Joulukuu 2005 (2005-12-21)
Standardit ovat tilattavissa SESKOsta puhelimitse (09) 696 3970, telekopiolla (09) 677 059, sähköpostilla: myynti@sesko.fi tai tilauslomakkeella.
Standardin tunnusnumeron jälkeen sulkeissa on vahvistuspäivämäärä (DOR). Jos EN-standardi perustuu IEC-standardiin, on vastaavan IEC-standardin tunnus esitetty sulkeissa EN-tunnuksen jälkeen. IEC-tunnuksen yhteydessä on myös merkintä yhdenmukaisuudesta: EQV = identtinen, MOD = EN-standardi sisältää eurooppalaisia ja/tai kansallisia muutoksia.
EN-standardeja
EN 50065-2-1/A1:2005
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz
to 148,5 kHz and intended for use in residential, commercial and light industrial environments
EN 50065-2-2/A1:2005
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments
EN 50065-2-3/A1:2005
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to
95 kHz and intended for use by electricity suppliers and distributors
EN 50363-4-2:2005
Insulating, sheathing and covering materials for low voltage energy cables. Part 4-2: PVC covering compounds
EN 50363-0:2005
Insulating, sheathing and covering materials for low-voltage energy cables. Part 0: General introduction
EN 50363-1:2005
Insulating, sheathing and covering materials for low voltage energy cables. Part 1: Cross-linked elastomeric insulating compounds
EN 50363-2-1:2005
Insulating, sheathing and covering materials for low voltage energy cables. Part 2-1: Cross-linked elastomeric sheathing compounds
EN 50363-2-2:2005
Insulating, sheathing and covering materials for low voltage energy cables. Part 2-2: Cross-linked elastomeric covering compounds
EN 50363-3:2005
Insulating, sheathing and covering materials for low voltage energy cables. Part 3: PVC insulating compounds
EN 50363-3:2005
Insulating, sheathing and covering materials for low voltage energy cables. Part 3: PVC insulating compounds
EN 50436-1:2005
Alcohol interlocks. Test methods and performance requirements Part 1: Part 1: Instruments for drink-driving-offender programs
EN 60061-1/A36:2005 (IEC 60061-1:1969/A36:2005)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
EN 60061-2/A33:2005 (IEC 60061-2:1969/A33:2005)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lam-pholders
EN 60061-3/A35:2005 (IEC 60061-3:1969/A35:2005)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
EN 60079-15:2005 (IEC 60079-15:2005)
Electrical apparatus for explosive gas atmospheres. Part 15: Construction, test and marking of type of protection "n" electrical apparatus
EN 60081/A3:2005 (IEC 60081:1997/A3:2005)
Double-capped fluorescent lamps. Performance specifications
EN 60216-2:2005 (IEC 60216-2:2005)
Electrical insulating materials. Thermal endurance properties. Part 2: Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
EN 60239:2005 (IEC 60239:2005)
Graphite electrodes for electric arc furnaces. Dimensions and designation
EN 60255-22-1: 2005 (IEC 60255-22-1:2005)
Electrical relays. Part 22-1: Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst immunity tests
EN 60317-0-1/A2:2005 (IEC 60317-0-1:1997/A2:2005)
Specifications for particular types of winding wires. Part 0-1: General requirements. Enamelled round copper wire
EN 60317-12/A2:2005 (IEC 60317-12:1990/A2:2005)
Specifications for particular types of winding wires. Part 12: Polyvinyl acetal enamelled round copper wire, class 120
EN 60384-6:2005 (IEC 60384-6:2005)
Fixed capacitors for use in electronic equipment. Part 6: Sectional specification. Fixed metallized polycarbonate film dielectric d.c. capacitors
EN 60384-6-1:2005 (IEC 60384-6-1:2005)
Fixed capacitors for use in electronic equipment. Part 6-1: Blank detail specification. Fixed metallized polycarbonate film dielectric d.c. capacitors.
Assessment level E
EN 60432-2/A1:2005 (IEC 60432-2:1999/A1:2005, modified)
Incandescent lamps. Safety specifications. Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
EN 60519-9:2005 (IEC 60519-9:2005)
Safety in electroheat installations. Part 9: Particular requirements for high-frequency dielectric heating installations
EN 60519-10: 2005 (IEC 60519-10:2005)
Safety in electroheat installations. Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
EN 60534-8-1:2005 (IEC 60534-8-1:2005)
Industrial-process control valves. Part 8-1: Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves
EN 60567:2005 (IEC 60567:2005)
Oil-filled electrical equipment. Sampling of gases and of oil for analysis of free and dissolved gases. Guidance
EN 60601-2-33/A1:2005 (IEC 60601-2-33:2002/A1:2005)
Medical electrical equipment. Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis
EN 60695-9-1:2005 (IEC 60695-9-1:2005)
Fire hazard testing. Part 9-1: Surface spread of flame. General guidance
EN 60704-2-5:2005 (IEC 60704-2-5:2005)
Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 2-5: Particular requirements for electric thermal storage room heaters
EN 60708:2005:2005 (IEC 60708:2005)
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
EN 60779:2005 (IEC 60779:2005)
Industrial electroheat equipment. Test methods for electroslag remelting furnaces
EN 60789: 2005 (IEC 60789:2005)
Medical electrical equipment. Characteristics and test conditions of radionuclide imaging devices. Anger type gamma cameras
EN 60871-1:2005 (IEC 60871-1:2005)
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V. Part 1: General
EN 60898-1/A11:2005
Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Part 1: Circuit-breakers for a.c. operation
EN 60923:2005 (IEC 60923:2005)
Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
EN 60947-4-1/A2:2005 (IEC 60947-4-1:2000/A2:2005)
Low-voltage switchgear and controlgear. Part 4-1: Contactors and motor-starters. Electromechanical contactors and motor-starters
EN 60947-6-1:2005 (IEC 60947-6-1:2005)
Low-voltage switchgear and controlgear. Part 6-1: Multiple function equipment. Transfer switching equipment
EN 60974-12:2005 (IEC 60974-12:2005)
Arc welding equipment. Part 12: Coupling devices for welding cables
EN 61160:2005 (IEC 61160:2005)
Design review
EN 61162-402:2005 (IEC 61162-402:2005)
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 402: Multiple talkers and multiple listeners. Ship systems interconnection. Documentation and test requirements
EN 61169-29:2005 (IEC 61169-29:2005)
Radio-frequency connectors. Part 29: Sectional specification. Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications). Characteristic impedance 50 ohms (type 1,0/2,3) 50 ohms and 75 ohms applications
EN 61249-4-2:2005 (IEC 61249-4-2:2005)
Materials for printed boards and other interconnecting structures. Part 4-2: Sectional specification set for prepreg materials, unclad. Multifunctional epoxide woven E-glass prepreg of defined flammability
EN 61249-4-5:2005 (IEC 61249-4-5:2005)
Materials for printed boards and other interconnecting structures. Part 4-5: Sectional specification set for prepreg materials, unclad. Polyimide, modified or
unmodified, woven E-glass prepreg of defined flammability
EN 61249-4-11:2005 (IEC 61249-4-11:2005)
Materials for printed boards and other interconnecting structures. Part 4-11: Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide, woven E-glass prepreg of defined flammability
EN 61249-4-12:2005 (IEC 61249-4-12:2005)
Materials for printed boards and other interconnecting structures. Part 4-12: Sectional specification set for prepreg materials, unclad. Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability
EN 61280-2-10:2005 (IEC 61280-2-10:2005)
Fibre optic communication subsystem test procedures. Part 2-10: Digital systems. Time-resolved chirp and alpha-factor measurement of laser transmitters
EN 61300-2-18:2005 (IEC 61300-2-18:2005)
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-18: Tests. Dry heat. High temperature endurance
EN 61300-2-19:2005 (IEC 61300-2-19:2005)
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-19: Tests. Damp heat (steady state)
EN 61300-2-42:2005 (IEC 61300-2-42:2005)
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-42: Tests. Static side load for connectors
EN 61340-4-4:2005 (IEC 61340-4-4:2005)
Electrostatics. Part 4-4: Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
EN 61605:2005 (IEC 61605:2005)
Fixed inductors for use in electronic and telecommunication equipment. Marking codes