Elo - joulukuu 2006 (2007-01-05)


Standardit ja asiakirjat ovat tilattavissa SESKOsta puhelimitse (09) 696 3970, telekopiolla (09) 677 059, sähköpostilla: myynti@sesko.fi tai  tilauslomakkeella.

Standardin tunnusnumeron jälkeen sulkeissa on vahvistuspäivämäärä (DOR). Jos EN-standardi perustuu IEC-standardiin, on vastaavan IEC-standardin tunnus esitetty sulkeissa EN-tunnuksen jälkeen. IEC-tunnuksen yhteydessä on myös merkintä yhdenmukaisuudesta: EQV = identtinen, MOD = EN-standardi sisältää eurooppalaisia ja/tai kansallisia muutoksia.


CLC/TR 50455:200X  
(2006-09-16)  
List of interpretations on the EN 60730 series "Automatic electrical controls for household and similar use

CLC/TR 50479:200X  (2006-09-16)  
Electrical installation guide -- Part 52: Selection and erection of electrical equipment - Wiring systems - Limitation of temperature rise of connecting interfaces

CLC/TR 50479:200X  (2006-10-09)  
Electrical installation guide - Selection and erection of electrical equipment - Wiring systems - Limitation of temperature rise of connecting interfaces

CLC/TR 50488:200X  (2006-09-29)  
Railway applications – Safety measures for the personnel working on or near overhead contact lines

CLC/TR 50493:200X  (2006-11-09)  
National wordings of laser warning labels

CLC/TR 61111:200X (IEC 61111:1992 (EQV) + A1:2002 (EQV) + corrigendum May 2000 (EQV)) (2006-09-02)  
Matting of insulating material for electrical purposes

CLC/TR 61800-6:200X (IEC/TR 61800-6:2003 (EQV)) (2006-09-02)  
Adjustable speed electrical power drive systems -- Part 6: Guide for determination of types of load duty and corresponding current ratings

CLC/TR 62258-3:200X (IEC/TR 62258-3:2005 (EQV)) (2006-12-12)  
Semiconductor die products -- Part 3: Recommendations for good practice in handling, packing and storage

CLC/TS 61111:200X (IEC 61111:1992 (EQV) + A1:2002 (EQV) + corrigendum May 2000 (EQV)) (2006-09-02)  
Matting of insulating material for electrical purposes

CLC/TS 61112:200X (IEC 61112:1992 (EQV) + A1:2002 (EQV) + corrigendum May 2000 (EQV)) (2006-09-02)  
Blankets of insulating material for electrical purposes

CLC/TS 61112:200X (IEC 61112:1992 (EQV) + A1:2002 (EQV) + corrigendum May 2000 (EQV)) (2006-09-02)  
Blankets of insulating material for electrical purposes

EN 175301-801:200X  (2006-10-01)  
Detail Specification: High density rectangular connectors, round removable crimp contacts

EN 50085-2-1:200X  (2006-10-01)  
Cable trunking systems and cable ducting systems for electrical installations -- Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings

EN 50090-2-2:1996/A2:200X  (2006-11-01)  
Home and Building Electronic Systems (HBES) -- Part 2-2: System overview - General technical requirements

EN 50090-5-3:200X  (2006-10-01)  
Home and Building Electronic Systems (HBES) -- Part 5-3: Media and media dependent layers - Radio frequency

EN 50116:200X  (2006-10-01)  
Information technology equipement - Routine electrical safety testing in production

EN 50214:200X  (2006-10-01)  
Flat polyvinyl chloride sheathed flexible cables

EN 50216-3:2002/A2:200X  (2006-10-01)  
Power transformer and reactor fittings -- Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion

EN 50216-5:2002/AB:200X  (2006-09-01)  
Power transformer and reactor fittings -- Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers

EN 50216-8:2005/AA:200X  (2006-09-01)  
Power transformer and reactor fittings -- Part 8: Butterfly valves for insulating liquid circuits

EN 50289-1-16:200X  (2006-11-01)  
Communication cables - Specifications for test methods -- Part 1-16: Electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions)

EN 50411-2-2:200X  (2006-10-01)  
Fibre organisers and closures to be used in optical fibre communication systems - Product specifications -- Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A

EN 50446:200X  (2006-09-01)  
Straight thermocouple assembly with metal or ceramic protection tube and accessories

EN 50464-1:200X  (2006-12-01)  
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV -- Part 1: General requirements

EN 50464-2-1:200X  (2006-12-01)  
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV -- Part 2-1: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - General requirements

EN 50464-2-2:200X  (2006-12-01)  
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV -- Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1

EN 50464-2-3:200X  (2006-12-01)  
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV -- Part 2-3: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1

EN 50464-4:200X  (2006-12-01)  
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV -- Part 4: Requirements and tests concerning pressurised corrugated tanks

EN 55011:200X (CISPR 11:2003 (MOD) + A1:2004 (MOD)) (2006-11-01)  
Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

EN 55011:200X/A2:200X (CISPR 11:2003/A2:2006 (EQV)) (2006-11-01)  
Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

EN 55014-1:200X (CISPR 14-1:2005 (EQV)) (2006-09-12)  
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission

EN 55014-2:1997/IS1:200X  (2005-07-16)  
Interpretation of Subclause 8.4 of EN 55014-2:1997 + A1:2001 -- Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard

EN 55015:200X (CISPR 15:2005 (EQV)) (2006-09-12)  
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN 55016-1-1:200X (CISPR 16-1-1:2006 (EQV)) (2006-11-01)  
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

EN 55016-1-1:200X/A2:200X (CISPR 16-1-1:2006/A1:2006 (EQV)) (2006-11-01)  
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

EN 55016-1-2:2004/A2:200X (CISPR 16-1-2:2003/A2:2006 (EQV)) (2006-11-01)  
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

EN 55016-2-3:200X (CISPR 16-2-3:2006 (EQV)) (2006-11-01)  
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

EN 55020:2002/IS2:200X  (2006-07-01)  
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement -- Interpretation of Subclause 4.3.4 - Requirements for screening effectiveness

EN 55020:200X (CISPR 20:2006 (EQV)) (2006-12-01)  
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

EN 60027-1:200X (IEC 60027-1:1995 (Reprint) (EQV) + A1:1997 (EQV)) (2006-10-01)  
Letter symbols to be used in electrical technology -- Part 1: General

EN 60027-3:200X (IEC 60027-3:2002 (EQV)) (2006-12-01)  
Letter symbols to be used in electrical technology -- Part 3: Logarithmic and related quantities, and their units

EN 60034-26:200X (IEC 60034-26:2006 (EQV)) (2006-11-01)  
Rotating electrical machines -- Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN 60034-5:2001/A1:200X (IEC 60034-5:2000/A1:2006 (EQV)) (2006-12-01)  
Rotating electrical machines -- Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

EN 60061-1:1993/A37:200X (IEC 60061-1:1969/A37:200X (34B/1225/FDIS) (EQV)) (2006-09-01)  
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps

EN 60061-2:1993/A34:200X (IEC 60061-2:1969/A34:200X (34B/1226/FDIS) (EQV)) (2006-09-01)  
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders

EN 60061-3:1993/A36:200X (IEC 60061-3:1969/A36:200X (34B/1227/FDIS) (EQV)) (2006-09-01)  
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges

EN 60061-4:1992/A10:200X (IEC 60061-4:1990/A10:200X (34B/1228/FDIS) (EQV)) (2006-09-01)  
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 4: Guidelines and general information

EN 60076-13:200X (IEC 60076-13:2006 (EQV)) (2006-09-01)  
Power transformers -- Part 13: Self-protected liquid-filled transformers

EN 60079-11:200X (IEC 60079-11:2006 (EQV)) (2006-10-01)  
Explosive atmospheres -- Part 11: Equipment protection by intrinsic safety "i"

EN 60079-26:200X (IEC 60079-26:2006 (EQV)) (2006-10-01)  
Explosive atmospheres -- Part 26: Equipment with equipment protection level (EPL) Ga

EN 60079-28:200X (IEC 60079-28:2006 (EQV)) (2006-10-01)  
Explosive atmospheres -- Part 28: Protection of equipment and transmission systems using optical radiation 

EN 60079-7:200X (IEC 60079-7:2006 (EQV)) (2006-10-01)  
Explosive atmospheres -- Part 7: Equipment protection by increased safety "e"

EN 60118-4:200X (IEC 60118-4:2006 (EQV)) (2006-11-01)  
Electroacoustics - Hearing aids -- Part 4: Induction loop systems for hearing aid purposes - Magnetic field strength

EN 60155:1995/A2:200X (IEC 60155:1993/A2:2006 (EQV)) (2006-12-01)  
Glow-starters for fluorescent lamps

EN 60216-6:200X (IEC 60216-6:2006 (EQV)) (2006-09-01)  
Electrical insulating materials - Thermal endurance properties -- Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method

EN 60309-1:1999/A1:200X (IEC 60309-1:1999/A1:2005 (EQV)) (2006-11-01)  
Plugs, socket-outlets and couplers for industrial purposes -- Part 1: General requirements

EN 60309-1:1999/AA:200X  (2006-11-01)  
Plugs, socket-outlets and couplers for industrial purposes -- Part 1: General requirements

EN 60309-2:1999/A1:200X (IEC 60309-2:1999/A1:2005 (EQV)) (2006-11-01)  
Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

EN 60309-2:1999/AA:200X  (2006-11-01)  
Plugs, socket-outlets and couplers for industrial purposes -- Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

EN 60317-0-5:200X (IEC 60317-0-5:2006 (EQV)) (2006-12-01)  
Specifications for particular types of winding wires -- Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire

EN 60317-0-6:2001/A1:200X (IEC 60317-0-6:2001/A1:2006 (EQV)) (2006-11-01)  
Specifications for particular types of winding wires -- Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

EN 60318-5:200X (IEC 60318-5:2006 (EQV)) (2006-09-01)  
Electroacoustics - Simulators of human head and ear -- Part 5: 2 cm³ coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts

EN 60335-2-2:2003/A2:200X (IEC 60335-2-2:2002/A2:2006 (EQV)) (2006-10-01)  
Household and similar electrical appliances - Safety -- Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

EN 60335-2-35:2002/A1:200X (IEC 60335-2-35:2002/A1:2006 (EQV)) (2006-11-01)  
Household and similar electrical appliances - Safety -- Part 2-35: Particular requirements for instantaneous water heaters

EN 60335-2-76:2005/A11:200X  (2006-09-12)  
Household and similar electrical appliances - Safety -- Part 2-76: Particular requirements for electric fence energizers

EN 60335-2-97:2000/A11:200X  (2006-10-01)  
Safety of household and similar electrical appliances -- Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

EN 60371-3-4:1995/A1:200X (IEC 60371-3-4:1992/A1:2006 (EQV)) (2006-10-01)  
Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

EN 60371-3-6:1995/A1:200X (IEC 60371-3-6:1992/A1:2006 (EQV)) (2006-10-01)  
Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

EN 60371-3-7:1995/A1:200X (IEC 60371-3-7:1995/A1:2006 (EQV)) (2006-10-01)  
Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping

EN 60384-3:200X (IEC 60384-3:2006 (EQV)) (2006-11-01)  
Fixed capacitors for use in electronic equipment -- Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

EN 60384-3-1:200X (IEC 60384-3-1:2006 (EQV)) (2006-11-01)  
Fixed capacitors for use in electronic equipment -- Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level E

EN 60439-5:200X (IEC 60439-5:2006 (EQV)) (2006-09-01)  
Low-voltage switchgear and controlgear assemblies -- Part 5: Particular requirements for assemblies for power distribution in public networks

EN 60519-2:200X (IEC 60519-2:2006 (EQV)) (2006-09-01)  
Safety in electroheat installations -- Part 2: Particular requirements for resistance heating equipment

EN 60519-4:200X (IEC 60519-4:2006 (EQV)) (2006-09-01)  
Safety in electroheat installations -- Part 4: Particular requirements for arc furnace installations

EN 60534-4:200X (IEC 60534-4:2006 (EQV)) (2006-09-01)  
Industrial-process control valves -- Part 4: Inspection and routine testing

EN 60565:200X (IEC 60565:2006 (EQV)) (2006-12-01)  
Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz

EN 60598-1:2004/A1:200X (IEC 60598-1:2003/A1:2006 (EQV)) (2006-12-05)  
Luminaires -- Part 1: General requirements and tests

EN 60601-1:200X (IEC 60601-1:2005 (EQV)) (2006-09-12)  
Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance

EN 60601-2-2:200X (IEC 60601-2-2:2006 (EQV)) (2006-10-01)  
Medical electrical equipment -- Part 2-2: Particular requirements for the safety of high frequency surgical equipment

EN 60669-2-2:200X (IEC 60669-2-2:2006 (EQV)) (2006-09-01)  
Switches for household and similar fixed electrical installations -- Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)

EN 60669-2-3:200X (IEC 60669-2-3:2006 (EQV)) (2006-09-01)  
Switches for household and similar fixed electrical installations -- Part 2-3: Particular requirements - Time delay switches (TDS)

EN 60691:2003/A1:200X (IEC 60691:2002/A1:2006 (EQV)) (2006-12-01)  
Thermal-links - Requirements and application guide

EN 60695-4:200X (IEC 60695-4:2005 (EQV)) (2006-10-01)  
Fire hazard testing -- Part 4: Terminology concerning fire tests for electrotechnical products

EN 60704-2-13:2000/A1:200X (IEC 60704-2-13:2000/A1:2005 (EQV)) (2006-12-01)  
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise -- Part 2-13: Particular requirements for range hoods

EN 60730-1:2000/A16:200X  (2006-11-01)  
Automatic electrical controls for household and similar use -- Part 1: General requirements

EN 60745-2-2:2003/AB:200X  (2006-12-01)  
Hand-held motor-operated electric tools - Safety -- Part 2-2: Particular requirements for screwdrivers and impact wrenches

EN 60745-2-3:200X (IEC 60745-2-3:2006 (MOD)) (2006-12-01)  
Hand-held motor-operated electric tools - Safety -- Part 2-3: Particular requirements for grinders, polishers and disk-type sanders

EN 60745-2-5:200X (IEC 60745-2-5:2006 (EQV)) (2006-11-01)  
Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws

EN 60745-2-5:200X/AA:200X  (2006-11-01)  
Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws

EN 60745-2-6:2003/A11:200X  (2006-10-01)  
Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers

EN 60745-2-8:2003/AB:200X  (2006-12-01)  
Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers

EN 60749-35:200X (IEC 60749-35:2006 (EQV)) (2006-09-01)  
Semiconductor devices - Mechanical and climatic test methods -- Part 35: Acoustic microscopy for plastic encapsulated electronic components

EN 60825-4:200X (IEC 60825-4:2006 (EQV)) (2006-10-01)  
Safety of laser products -- Part 4: Laser guards

EN 60870-5-104:200X (IEC 60870-5-104:2006 (EQV)) (2006-09-01)  
Telecontrol equipment and systems -- Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles

EN 60874-1:200X (IEC 60874-1:2006 (EQV)) (2006-12-01)  
Connectors for optical fibres and cables -- Part 1: Generic specification

EN 60874-1-1:200X (IEC 60874-1-1:2006 (EQV)) (2006-11-01)  
Connectors for optical fibres and cables -- Part 1-1: Blank detail specification

EN 60904-1:200X (IEC 60904-1:2006 (EQV)) (2006-10-01)  
Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage characteristics

EN 60947-4-2:2000/A2:200X (IEC 60947-4-2:1999/A2:2006 (EQV)) (2006-12-01)  
Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

EN 60947-4-3:2000/A1:200X (IEC 60947-4-3:1999/A1:2006 (EQV)) (2006-11-01)  
Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

EN 60947-5-8:200X (IEC 60947-5-8:2006 (EQV)) (2006-11-01)  
Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

EN 60947-8:2003/A1:200X (IEC 60947-8:2003/A1:2006 (EQV)) (2006-10-01)  
Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

EN 60958-3:200X (IEC 60958-3:2006 (EQV)) (2006-10-01)  
Digital audio interface -- Part 3: Consumer applications

EN 60974-4:200X (IEC 60974-4:2006 (EQV)) (2006-12-01)  
Arc welding equipment -- Part 4: In-service inspection and testing

EN 61000-4-12:200X (IEC 61000-4-12:2006 (EQV)) (2006-11-01)  
Electromagnetic compatibility (EMC) -- Part 4-12: Testing and measurement techniques - Ring wave immunity test

EN 61000-4-5:200X (IEC 61000-4-5:2005 (EQV)) (2006-10-01)  
Electromagnetic Compatibility (EMC) -- Part 4-5: Testing and measurement techniques - Surge immunity test

EN 61000-6-1:200X (IEC 61000-6-1:2005 (EQV)) (2006-12-01)  
Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments

EN 61000-6-3:200X (IEC 61000-6-3:2006 (EQV)) (2006-12-01)  
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

EN 61000-6-4:200X (IEC 61000-6-4:2006 (EQV)) (2006-12-01)  
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments

EN 61033:200X (IEC 61033:1991 (EQV) + A1:2006 (EQV)) (2006-11-01)  
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate

EN 61061-1:200X (IEC 61061-1:2006 (EQV)) (2006-11-01)  
Non-impregnated densified laminated wood for electrical purposes -- Part 1: Definitions, designation and general requirements

EN 61076-3-104:200X (IEC 61076-3-104:2006 (EQV)) (2006-10-01)  
Connectors for electronic equipment - Product  requirements -- Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz

EN 61076-3-106:200X (IEC 61076-3-106:2006 (EQV)) (2006-11-01)  
Connectors for electronic equipment - Product requirements -- Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

EN 61163-1:200X (IEC 61163-1:2006 (EQV)) (2006-11-01)  
Reliability stress screening -- Part 1: Repairable assemblies manufactured in lots

EN 61189-2:200X (IEC 61189-2:2006 (EQV)) (2006-09-01)  
Test methods for electrical materials, printed boards and other  interconnection structures and assemblies -- Part 2: Test methods for materials for interconnection structures

EN 61189-5:200X (IEC 61189-5:2006 (EQV)) (2006-09-01)  
Test methods for electrical materials, interconnection structures and assemblies -- Part 5: Test methods for printed board assemblies

EN 61204-7:200X (IEC 61204-7:2006 (EQV)) (2006-10-01)  
Low voltage power supplies, d.c. output -- Part 7: Safety requirements

EN 61212-2:200X (IEC 61212-2:2006 (EQV)) (2006-11-01)  
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 2: Methods of test

EN 61212-3-3:200X (IEC 61212-3-3:2006 (EQV)) (2006-09-01)  
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 3: Round laminated moulded rods

EN 61274-1-1:200X (IEC 61274-1-1:2006 (EQV)) (2006-10-01)  
Adaptors for fibre optic connectors -- Part 1-1: Blank detail specification

EN 61290-1-1:200X (IEC 61290-1-1:2006 (EQV)) (2006-09-01)  
Optical amplifiers - Test methods -- Part 1-1: Optical power and gain parameters - Optical spectrum analyzer method

EN 61291-1:200X (IEC 61291-1:2006 (EQV)) (2006-09-01)  
Optical amplifiers -- Part 1: Generic specification

EN 61300-2-16:200X (IEC 61300-2-16:2006 (EQV)) (2006-10-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-16: Tests - Mould growth

EN 61300-2-33:200X (IEC 61300-2-33:2006 (EQV)) (2006-12-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-33: Tests - Assembly and disassembly of fibre optic closures

EN 61300-2-37:200X (IEC 61300-2-37:2006 (EQV)) (2006-11-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-37: Tests - Cable bending for fibre optic closures

EN 61300-2-38:200X (IEC 61300-2-38:2006 (EQV)) (2006-10-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre optic closures

EN 61300-2-47:200X (IEC 61300-2-47:2006 (EQV)) (2006-12-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-47: Tests - Thermal shocks

EN 61300-3-14:200X (IEC 61300-3-14:2006 (EQV)) (2006-11-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator

EN 61300-3-15:200X (IEC 61300-3-15:2006 (EQV)) (2006-11-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface

EN 61300-3-24:200X (IEC 61300-3-24:2006 (EQV)) (2006-11-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre

EN 61300-3-32:200X (IEC 61300-3-32:2006 (EQV)) (2006-09-01)  
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components

EN 61314-1-1:200X (IEC 61314-1-1:2006 (EQV)) (2006-10-01)  
Fibre optic fan-outs -- Part 1-1: Blank detail specification

EN 61326-2-4:200X (IEC 61326-2-4:2006 (EQV)) (2006-11-01)  
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

EN 61326-2-5:200X (IEC 61326-2-5:2006 (EQV)) (2006-09-01)  
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2

EN 61347-2-7:200X (IEC 61347-2-7:2006 (EQV)) (2006-11-01)  
Lamp controlgear -- Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting

EN 61391-1:200X (IEC 61391-1:2006 (EQV)) (2006-10-01)  
Ultrasonics - Pulse-echo scanners -- Part 1: Techniques for calibrating spatial measurement systems and measurement of system point spread function response

EN 61526:200X (IEC 61526:2005 (MOD)) (2006-10-01)  
Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters and monitors

EN 61534-21:200X (IEC 61534-21:2006 (EQV)) (2006-09-01)  
Powertrack systems -- Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

EN 61537:200X (IEC 61537:2006 (EQV)) (2006-12-01)  
Cable management - Cable tray systems and cable ladder systems

EN 61587-3:200X (IEC 61587-3:2006 (EQV)) (2006-10-01)  
Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 -- Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks

EN 61606-4:200X (IEC 61606-4:2005 (EQV)) (2006-12-01)  
Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics -- Part 4: Personal computer

EN 61672-3:200X (IEC 61672-3:2006 (EQV)) (2006-11-01)  
Electroacoustics - Sound level meters -- Part 3: Periodic tests

EN 61730-2:200X (IEC 61730-2:2004 (MOD)) (2006-12-01)  
Photovoltaic (PV) module safety qualification -- Part 2: Requirements for testing

EN 61747-3:200X (IEC 61747-3:2006 (EQV)) (2006-09-01)  
Liquid crystal display devices -- Part 3: Liquid crystal diplay (LCD) cells - Sectional specification

EN 61747-3-1:200X (IEC 61747-3-1:2006 (EQV)) (2006-10-01)  
Liquid crystal display devices -- Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

EN 61753-101-2:200X (IEC 61753-101-2:2006 (EQV)) (2006-10-01)  
Fibre optic interconnecting devices and passive components performance standard -- Part 101-2: Fibre management systems for category C - Controlled environment

EN 61755-2-2:200X (IEC 61755-2-2:2006 (EQV)) (2006-10-01)  
Fibre optic connector optical interfaces -- Part 2-2: Optical interface standard single mode angled physically contacting fibres

EN 61755-3-5:200X (IEC 61755-3-5:2006 (EQV)) (2006-12-01)  
Fibre optic connector optical interfaces -- Part 3-5: Optical Interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre

EN 61755-3-6:200X (IEC 61755-3-6:2006 (EQV)) (2006-12-01)  
Fibre optic connector optical interfaces -- Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre

EN 61788-1:200X (IEC 61788-1:2006 (EQV)) (2006-12-01)  
Superconductivity -- Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors

EN 61788-10:200X (IEC 61788-10:2006 (EQV)) (2006-09-01)  
Superconductivity -- Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method

EN 61788-2:200X (IEC 61788-2:2006 (EQV)) (2006-12-01)  
Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors

EN 61788-7:200X (IEC 61788-7:2006 (EQV)) (2006-11-01)  
Superconductivity -- Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies

EN 61937-5:200X (IEC 61937-5:2006 (EQV)) (2006-11-01)  
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 -- Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s)

EN 61966-2-4:200X (IEC 61966-2-4:2006 (EQV)) (2006-09-01)  
Multimedia systems and equipment - Colour measurement and management -- Part 2-4: Colour management - Extended-gamut YCC colour space for video applications - xvYCC

EN 61982-1:200X (IEC 61982-1:2006 (EQV)) (2006-10-01)  
Secondary batteries for the propulsion of electric road vehicles -- Part 1: Test parameters

EN 62002-2:200X (IEC 62002-2:2005 (EQV)) (2006-10-01)  
Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing

EN 62034:200X (IEC 62034:2006 (EQV)) (2006-09-12)  
Automatic test systems for battery powered emergency escape lighting

EN 62047-2:200X (IEC 62047-2:2006 (EQV)) (2006-09-01)  
Semiconductor devices - Micro-electromechanical devices -- Part 2: Tensile testing methods of thin film materials

EN 62047-3:200X (IEC 62047-3:2006 (EQV)) (2006-09-01)  
Semiconductor devices - Micro-electromechanical devices -- Part 3: Thin film standard test piece for tensile-testing

EN 62056-47:200X (IEC 62056-47:2006 (EQV)) (2006-12-01)  
Electricity metering - Data exchange for meter reading, tariff and load control -- Part 47: COSEM transport layers for IPv4 networks

EN 62056-61:200X (IEC 62056-61:2006 (EQV)) (2006-12-01)  
Electricity metering - Data exchange for meter reading, tariff and load control -- Part 61: Object identification system (OBIS)

EN 62056-62:200X (IEC 62056-62:2006 (EQV)) (2006-12-01)  
Electricity metering - Data exchange for meter reading, tariff and load control -- Part 62: Interface classes

EN 62076:200X (IEC 62076:2006 (EQV)) (2006-10-01)  
Industrial heating installations - Test methods for induction channel and induction crucible furnaces

EN 62231:200X (IEC 62231:2006 (EQV)) (2006-09-12)  
Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria

EN 62258-5:200X (IEC 62258-5:2006 (EQV)) (2006-09-01)  
Semiconductor die products -- Part 5: Requirements for information concerning electrical simulation

EN 62258-6:200X (IEC 62258-6:2006 (EQV)) (2006-09-01)  
Semiconductor die products -- Part 6: Requirements for information concerning thermal simulation

EN 62261-1:200X (IEC 62261-1:2005 (EQV)) (2006-12-01)  
Television METADATA -- Part 1: Metadata dictionary structure

EN 62261-2:200X (IEC 62261-2:2005 (EQV)) (2006-12-01)  
Television METADATA -- Part 2: Data encoding protocol using key-length-value

EN 62271-100:2001/A2:200X (IEC 62271-100:2001/A2:2006 (EQV)) (2006-10-01)  
High-voltage switchgear and controlgear -- Part 100: High-voltage alternating-current circuit-breakers

EN 62271-109:200X (IEC 62271-109:2006 (EQV)) (2006-11-01)  
High-voltage switchgear and controlgear -- Part 109: Alternating-current series capacitor by-pass switches

EN 62271-201:200X (IEC 62271-201:2006 (EQV)) (2006-10-01)  
High-voltage switchgear and controlgear  -- Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

EN 62271-202:200X (IEC 62271-202:2006 (EQV)) (2006-09-01)  
High-voltage switchgear ands controlgear -- Part 202: High voltage/low voltage prefabricated substation

EN 62271-3:200X (IEC 62271-3:2006 (EQV)) (2006-09-01)  
High-voltage switchgear and controlgear -- Part 3: Digital interfaces based on IEC 61850

EN 62290-1:200X (IEC 62290-1:2006 (EQV)) (2006-11-01)  
Railway applications - Urban guided transport management and command/control systems -- Part 1: System principles and fundamental concepts

EN 62308:200X (IEC 62308:2006 (EQV)) (2006-11-01)  
Equipment reliability - Reliability assessment methods

EN 62310-2:200X (IEC 62310-2:2006 (EQV)) (2006-09-01)  
Static transfer systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements

EN 62310-2:200X/AA:200X  (2006-09-01)  
Static transfer systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements

EN 62317-8:200X (IEC 62317-8:2006 (EQV)) (2006-10-01)  
Ferrite cores - Dimensions -- Part 8: E-cores

EN 62329-2:200X (IEC 62329-2:2006 (EQV)) (2006-10-01)  
Heat shrinkable moulded shapes -- Part 2: Methods of test

EN 62343-1-3:200X (IEC 62343-1-3:2006 (EQV)) (2006-11-01)  
Dynamic modules -- Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environments (Category C)

EN 62384:200X (IEC 62384:2006 (EQV)) (2006-09-01)  
D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements 

EN 62395-1:200X (IEC 62395-1:2006 (EQV)) (2006-09-01)  
Electrical resistance trace heating systems for industrial and commercial applications -- Part 1: General and testing requirements

EN 81714-2:200X (IEC 81714-2:2006 (EQV)) (2006-10-01)  
Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange

EN ISO/IEC 17021:200X (ISO/IEC 17021:2006 (EQV)) (2006-11-01)  
Conformity assessment - Requirements for bodies providing audit and certification of management systems

HD 21.15 S1:200X  (2006-09-01)  
Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation -- Part 15: Single core cables, insulated with halogen-free thermoplastic compound, for fixed wiring

HD 22.10 S2:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having crosslinked insulation -- Part 10: EPR insulated and polyurethane sheathed flexible cables

HD 22.11 S2:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having crosslinked insulation -- Part 11: EVA cords and flexible cables

HD 22.12 S2:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having crosslinked insulation -- Part 12: Heat resistant EPR cords and flexible cables

HD 22.13 S2:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation -- Part 13: Halogen-free flexible cables having low emission of smoke

HD 22.14 S3:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation -- Part 14: Cords for applications requiring high flexibility

HD 22.15 S2:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation -- Part 15: Multicore cables insulated  and sheathed with heat resistant silicone rubber

HD 22.16 S2:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation -- Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables

HD 22.9 S3:200X  (2006-12-01)  
Cables of rated voltages up to and including 450/750 V and having crosslinked insulation -- Part 9: Single core halogen-free non-sheathed cables for fixed wiring having low emission of smoke

HD 603 S1:1994/A3:200X  (2006-11-01)  
Distribution cables of rated voltage 0,6/1 kV

HD 603 S1:1994/AA:200X  (2006-11-01)  
Distribution cables of rated voltage 0,6/1 kV

HD 60364-6:200X (IEC 60364-6:2006 (EQV)) (2006-09-01)  
Low voltage electrical installations -- Part 6: Verification

HD 60364-6:200X/AA:200X  (2006-09-01)  
Low voltage electrical installations -- Part 6: Verification

HD 60364-7-701:200X (IEC 60364-7-701:2006 (EQV)) (2006-09-01)  
Low-voltage electrical installations -- Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

HD 60364-7-701:200X/AA:200X  (2006-09-01)  
Low-voltage electrical installations -- Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

HD 60364-7-705:200X (IEC 60364-7-705:2006 (MOD)) (2006-10-01)  
Low-voltage electrical installations -- Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

HD 620 S1:1996/A3:200X  (2006-11-01)  
Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV

HD 638 S1:2001/AA:200X  (2006-09-01)  
Road traffic signal systems

prEN 45020:2006 (ISO/IEC Guide 2:2004 (EQV)) (2006-11-05)  
Standardization and related activities - General vocabulary