Elokuu 2006 (2006-09-01)
Standardit ja asiakirjat ovat tilattavissa SESKOsta puhelimitse (09) 696 3970, telekopiolla (09) 677 059, sähköpostilla: myynti@sesko.fi tai
tilauslomakkeella.
Standardin tunnusnumeron jälkeen sulkeissa on vahvistuspäivämäärä (DOR). Jos EN-standardi perustuu IEC-standardiin, on vastaavan IEC-standardin tunnus esitetty sulkeissa EN-tunnuksen jälkeen. IEC-tunnuksen yhteydessä on myös merkintä yhdenmukaisuudesta: EQV = identtinen, MOD = EN-standardi sisältää eurooppalaisia ja/tai kansallisia muutoksia.
EN-standardeja
EN 50310:2006
Application of equipotential bonding and earthing in buildings with information technology equipment
EN 50419:2006
Marking of electrical and electronic equipment in accordance. with Article 11(2) of Directive 2002/96/EC (WEEE)
EN 55013/A2 (CISPR 13:2001/A2:2006)
Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
EN 60060-3:2006 (IEC 60060-3:2006)
High voltage test techniques. Part 3: Definitions and requirements for on-site tests
EN 60311/A1:2006 (IEC 60311:2002/A1:2005)
Electric irons for household or similar use. Methods for measuring performance
EN 60335-1/A12:2006
Household and similar electrical appliances. Safety. Part 1: General requirements
EN 60335-2-43/A1:2006 (IEC 60335-2-43:2002/A1:2005)
Household and similar electrical appliances. Safety. Part 2-43: Particular requirements for clothes dryers and towel rails
EN 60335-2-67/A1:2006 (IEC 60335-2-67:2002/A1:2005)
Household and similar electrical appliances. Safety. Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use
EN 60335-2-68/A1:2006 (IEC 60335-2-68:2002/A1:2005)
Household and similar electrical appliances. Safety. Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use
EN 60371-3-2:2006 (IEC 60371-3-2:2005)
Insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 2: Mica paper
EN 60371-3-5:2006 (IEC 60371-3-5:2005)
Insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 5: Glass-backed mica paper with an epoxy resin binder
for post-impregnation (VPI)
EN 60384-13:2006 (IEC 60384-13:2006)
Fixed capacitors for use in electronic equipment. Part 13: Sectional specification. Fixed polypropylene film dielectric metal foil d.c. capacitors
EN 60384-13-1:2006 (IEC 60384-13-1:2006)
Fixed capacitors for use in electronic equipment. Part 13-1: Blank detail specification. Fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E
EN 60384-19:2006 (IEC 60384-19:2006)
Fixed capacitors for use in electronic equipment. Part 19: Sectional specification. Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
EN 60384-19-1:2006 (IEC 60384-19-1:2006)
Fixed capacitors for use in electronic equipment. Part 19-1: Blank detail specification. Fixed metallized polyethylene-terephthalate film dielectric
surface mount d.c. capacitors. Assessment level EZ
EN 60454-3-8:2006 (IEC 60454-3-8:2006)
Pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials.- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
EN 60464-1/A1:2006 (IEC 60464-1:1998/A1:2006)
Varnishes used for electrical insulation. Part 1: Definitions and general requirements
EN 60464-2/A1:2006 (IEC 60464-2:2001/A1:2006)
Varnishes used for electrical insulation. Part 2: Methods of test
EN 60464-3-1/A1:2006 (IEC 60464-3-1:2001/A1:2006)
Varnishes used for electrical insulation. Part 3: Specifications for individual materials. Sheet 1: Ambient curing finishing varnishes
EN 60512-12-3:2006 (IEC 60512-12-3:2006)
Connectors for electronic equipment. Tests and measurements. Part 12-3: Soldering tests. Test 12c: Solderability, de-wetting
EN 60512-9-3:2006 (IEC 60512-9-3:2006)
Connectors for electronic equipment. Tests and measurements. Part 9-3: Endurance tests. Test 9c: Mechanical operation (engaging/separating) with electrical load
EN 60512-12-2:2006 (IEC 60512-12-2:2006)
Connectors for electronic equipment. Tests and measurements. Part 12-2: Soldering tests. Test 12b: Solderability, wetting, soldering iron method
EN 60512-13-5:2006 (IEC 60512-13-5:2006)
Connectors for electronic equipment. Tests and measurements. Part 13-5: Mechanical operation tests. Test 13e: Polarizing and keying method
EN 60512-12-4:2006 (IEC 60512-12-4:2006)
Connectors for electronic equipment. Tests and measurements. Part 12-4: Soldering tests. Test 12d: Resistance to soldering heat, solder bath method
EN 60512-12-5:2006 (IEC 60512-12-5:2006)
Connectors for electronic equipment. Tests and measurements. Part 12-5: Soldering tests. Test 12e: Resistance to soldering heat, soldering iron method
EN 60512-13-1:2006 (IEC 60512-13-1:2006)
Connectors for electronic equipment. Tests and measurements. Part 13-1: Mechanical operation tests. Test 13a: Engaging and separating forces
EN 60512-13-2:2006 (IEC 60512-13-2:2006)
Connectors for electronic equipment. Tests and measurements. Part 13-2: Mechanical operation tests. Test 13b: Insertion and withdrawal forces
EN 60664-4:2006 (IEC 60664-4:2005)
Insulation coordination for equipment within low-voltage systems. Part 4: Consideration of high-frequency voltage stress
EN 60684-3-212:2006 (IEC 60684-3-212:2005)
Flexible insulating sleeving. Part 3: Specifications for individual types of sleeving. Sheet 212: Heat-shrinkable polyolefin sleevings
EN 60684-3-233:2006 (IEC 60684-3-233:2006)
Flexible insulating sleeving. Part 3: Specifications for individual types of sleeving. Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
EN 60705/A2:2006 (IEC 60705:1999/A2:2006)
Household microwave ovens. Methods for measuring performance
EN 61076-2-101/A1:2006 (IEC 61076-2-101:2003/A1:2006)
Connectors for electronic equipment. Part 2-101: Circular connectors. Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
EN 61242/A12:2006
Electrical accessories. Cable reels for household and similar purposes
EN 61267:2006 (IEC 61267:2005)
Medical diagnostic X-ray equipment. Radiation conditions for use in the determination of characteristics
EN 61300-3-29:2006(IEC 61300-3-29:2005)
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-29: Examinations and measurements.
Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components
EN 61315:2006 (IEC 61315:2005)
Calibration of fibre-optic power meters
EN 61338-1-4:2006 (IEC 61338-1-4:2005)
Waveguide type dielectric resonators. Part 1-4: General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
EN 61347-2-1/A1:2006 (IEC 61347-2-1:2000/A1:2005)
Lamp controlgear. Part 2-1: Particular requirements for starting devices (other than glow starters)
EN 61347-2-2/A1:2006 (IEC 61347-2-2:2000/A1:2005)
Lamp controlgear. Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
EN 61347-2-3/A2:2006 (IEC 61347-2-3:2000/A2:2006)
Lamp controlgear. Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
EN 61347-2-8/A1:2006 (IEC 61347-2-8:2000/A1:2006)
Lamp controlgear. Part 2-8: Particular requirements for ballasts for fluorescent lamps
EN 61543/A2:2006 (IEC 61543:1995/A2:2005)
Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility
EN 61951-1/A1:2006 (IEC 61951-1:2003/A1:2005)
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Part 1: Nickel-cadmium
EN 61967-4/A1:2006 (IEC 61967-4:2002/A1:2006)
Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Part 4: Measurement of conducted emissions. 1 ohm/150 ohm direct coupling method
EN 61377-1:2006 (IEC 61377-1:2006)
Railway applications. Rolling stock. Part 1: Combined testing of inverter-fed alternating current motors and their control system
EN 61755-1:2006 (IEC 61755-1:2005)
Fibre optic connector optical interfaces. Part 1: Optical interfaces for single mode non-dispersion shifted fibres. General and guidance
EN 62040-2:2006 (IEC 62040-2:2005)
Uninterruptible power systems (UPS). Part 2: Electromagnetic compatibility (EMC) requirements
EN 62129:2006 (IEC 62129:2006)
Calibration of optical spectrum analyzers
EN 62132-1:2006:2006 (IEC 62132-1:2006)
Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Part 1: General conditions and definitions
EN 62132-5:2006 (IEC 62132-5:2005)
Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Part 5: Workbench Faraday cage method
EN 62271-108:2006 (IEC 62271-108:2005)
High-voltage switchgear and controlgear. Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
EN 62217:2006 (IEC 62217:2005)
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V. General definitions, test methods and acceptance criteria
EN 62305-1:2006 (IEC 62305-1:2006)
Protection against lightning. Part 1: General principles
EN 62305-2:2006 (IEC 62305-2:2006)
Protection against lightning. Part 2: Risk management
EN 62305-3:2006 (IEC 62305-3:2006, modified)
Protection against lightning. Part 3: Physical damage to structures and life hazard
EN 62305-4:2006 (IEC 62305-4:2006)
Protection against lightning. Part 4: Electrical and electronic systems within structures
EN 62329-1:2006 (IEC 62329-1:2005)
Heat shrinkable moulded shapes. Part 1: Definitions and general requirements
TR-raportteja
CLC/TR 50450:2006
Resistibility requirements for equipment having (a) telecommunication port(s)
HD-asiakirjoja
HD 22.3 S4/A1:2006
Cables of rated voltages up to and including 450/750 V and having cross-linked insulation. Part 3: Heat resistant silicone rubber insulated cables
HD 629.1 S2:2006
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV. Part 1: Cables with extruded insulation
HD 629.2 S2:2006
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV. Part 2: Cables with impregnated paper insulation
Maaliskuu 2006 (2006-03-16)
EN-standardeja
EN 55016-1-4/A2:2005 (CISPR 16-1-4:2003/A2:2005)
Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-4: Radio disturbance and immunity measuring apparatus. Ancillary equipment. Radiated disturbances
EN 60068-2-30:2005 (IEC 60068-2-30:2005)
Environmental testing. Part 2-30: Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60118-7:2005 (IEC 60118-7:2005)
Electroacoustics. Hearing aids. Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
EN 60118-8: 2005 (IEC 60118-8:2005)
Electroacoustics. Hearing aids. Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
EN 60255-27:2005 (IEC 60255-27:2005)
Measuring relays and protection equipment. Part 27: Product safety requirements
EN 60317-0-4/A2:2005 (IEC 60317-0-4:1997/A2:2005)
Specifications for particular types of winding wires. Part 0-4: General requirements. Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
EN 60317-30/A2:2005 (IEC 60317-30:1990/A2:2005)
Specifications for particular types of winding wires. Part 30: Polyimide enamelled rectangular copper wire, class 220
EN 60317-31/A2:2005 (IEC 60317-31:1990/A2:2005)
Specifications for particular types of winding wires. Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
EN 60317-32/A2:2005 (IEC 60317-32:1990/A2:2005)
Specifications for particular types of winding wires. Part 32: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
EN 60317-33/A2:2005 (IEC 60317-33:1990/A2:2005)
Specifications for particular types of winding wires. Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
EN 60317-39/A2:2005 (IEC 60317-39:1992/A2:2005)
Specifications for particular types of winding wires. Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
EN 60317-40/A2:2005 (IEC 60317-40:1992/A2:2005)
Specifications for particular types of winding wires. Part 40: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
EN 60320-2-4:2005 (IEC 60320-2-4:2005)
Appliance couplers for household and similar general purposes. Part 2-4: Couplers dependent on appliance weight for engagement
EN 60384-2: 2005 (IEC 60384-2:2005)
Fixed capacitors for use in electronic equipment. Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors
EN 60384-2-1:2005 (IEC 60384-2-1:2005)
Fixed capacitors for use in electronic equipment. Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors. Assessment levels E and EZ
EN 60384-16:2005 (IEC 60384-16:2005)
Fixed capacitors for use in electronic equipment. Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
EN 60384-16-1:2005 (IEC 60384-16-1:2005)
Fixed capacitors for use in electronic equipment. Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors. Assessment levels E and EZ
EN 60384-17:2005 (IEC 60384-17:2005)
Fixed capacitors for use in electronic equipment. Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
EN 60384-17-1:2005 (IEC 60384-17-1:2005)
Fixed capacitors for use in electronic equipment. Part 17-1: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors. Assessment levels E and EZ
EN 60534-8-4:2005 (IEC 60534-8-4:2005)
Industrial-process control valves. Part 8-4: Noise considerations. Prediction of noise generated by hydrodynamic flow
EN 60601-2-37/A2:2005 (IEC 60601-2-37:2001/A2:2005)
Medical electrical equipment. Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment
EN 60661/A2:2005 (IEC 60661:1999/A2:2005)
Methods for measuring the performance of electric household coffee makers
EN 60684-2/A2:2005 (IEC 60684-2:1997/A2:2005)
Flexible insulating sleeving. Part 2: Methods of test
EN 60684-3-214:2005 (IEC 60684-3-214:2005)
Flexible insulating sleeving. Part 3: Specifications for individual types of sleeving. Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 Thick and medium wall
EN 60794-2-11:2005 (IEC 60794-2-11:2005)
Optical fibre cables. Part 2-11: Indoor cables. Detailed specification for simplex and duplex cables for use in premises cabling
EN 60794-2-21:2005 (IEC 60794-2-21:2005)
Optical fibre cables. Part 2-21: Indoor cables. Detailed specification for multi-fibre optical distribution cables for use in premises cabling
EN 60794-2-31:2005 (IEC 60794-2-31:2005)
Optical fibre cables. Part 2-31: Indoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling
EN 61000-3-3/A2:2005 (IEC 61000-3-3:1994/A2:2005)
Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
EN 61175: 2005 (IEC 61175:2005)
Industrial systems, installations and equipment and industrial products. Designation of signals
EN 61290-1-2:2005 (IEC 61290-1-2:2005)
Optical amplifiers. Test methods. Part 1-2: Power and gain parameters. Electrical spectrum analyzer method
EN 61290-1-3:2005 (IEC 61290-1-3:2005)
Optical amplifiers. Test methods. Part 1-3: Power and gain parameters. Optical power meter method
EN 61300-2-12:2005 (IEC 61300-2-12:2005)
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-12: Tests. Impact
EN 61300-3-1:2005 (IEC 61300-3-1:2005)
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-1: Examinations and measurements. Visual examination
EN 61332:2005 (IEC 61332:2005)
Soft ferrite material classification
EN 61744:2005 (IEC 61744:2005)
Calibration of fibre optic chromatic dispersion test sets
EN 61754-5:2005 (IEC 61754-5:2005)
Fibre optic connector interfaces. Part 5: Type MT connector family
EN 61754-10:2005 (IEC 61754-10:2005)
Fibre optic connector interfaces. Part 10: Type Mini-MPO connector family
EN 61935-1:2005 (IEC 61935-1:2005, modified)
Testing of balanced communication cabling in accordance with standards series EN 50173. Part 1: Installed cabling
EN 61937-7:2005 (IEC 61937-7:2004)
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats
EN 61967-2:2005 (IEC 61967-2:2005)
Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Part 2: Measurement of radiated emissions. TEM cell and wideband TEM cell method
EN 62053-52:2005 (IEC 62053-52:2005)
Electricity metering equipment (AC). Particular requirements
Part 52: Symbols
EN 62055-31:2005 (IEC 62055-31:2005)
Electricity metering. Payment systems. Part 31: Particular requirements. Static payment meters for active energy (classes 1 and 2)
EN 62271-107: 2005 (IEC 62271-107:2005)
High-voltage switchgear and controlgear. Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV
EN 62271-110:2005 (IEC 62271-110:2005)
High-voltage switchgear and controlgear. Part 110: Inductive load switching
EN 62276:2005 (IEC 62276:2005)
Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods
EN 62298-4:2005 (IEC 62298-4:2005)
TeleWeb application. Part 4: Hyperteletext profile
EN 62301:2005 (IEC 62301:2005, modified)
Household electrical appliances. Measurement of standby power
EN 62317-4:2005 (IEC 62317-4:2005)
Ferrite cores. Dimensions. Part 4: RM-cores and associated parts
EN 62317-7:2005 (IEC 62317-7:2005)
Ferrite cores. Dimensions. Part 7: EER-cores
EN 62359:2005 (IEC 62359:2005)
Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
EN 62365:2005 (IEC 62365:2004)
Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks
TR-raportteja
CLC/TR 50456:2005
Guidelines to achieving compliance with EC directives for alarm systems
CLC/TR 50469:2005
Lightning protection systems. Symbols
CLC/TR 60919-1:2005 (IEC/TR 60919-1:2005)
Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Part 1: Steady-state conditions
TS-spesifikaatioita
CLC/TS 50459-1:2005
Railway applications. Communication, signaling and processing systems. European Rail Traffic Management System. Driver-Machine Interface. Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information
CLC/TS 50459-2:2005
Railway applications. Communication, signaling and processing systems. European Rail Traffic Management System. Driver-Machine Interface. Part 2: Ergonomic arrangements of ERTMS/ETCS information
CLC/TS 50459-3:2005
Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface. Part 2: Ergonomic arrangements of ERTMS/GSM-R information
CLC/TS 50459-4:2005
Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface. Part 4: Data entry for the ERTMS/ETCS/GSM-R systems
CLC/TS 50459-5:2005
Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface. Part 5: Symbols
CLC/TS 50459-6:2005
Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface. Part 6: Audible information
CLC/TS 60034-25:2005
Rotating electrical machines. Part 25: Guide for the design and performance of cage induction motors specifically designed for converter supply
HD-asiakirjoja
HD 604 S1/A3:2005
0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations
HD 622 S1/A2:2005
Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations
HD 627 S1/A2:2005
Multicore and multipair cables for installation above and below ground
HD 60364-5-559:2005 [(IEC 60364-5-55:2001 (Clause 559), modified)]
Electrical installations of buildings. Part 5-55: Selection and erection of electrical equipment. Other equipment Clause 559: Luminaires and lighting installations