Tammi - maaliskuu 2009 (2009-03-31)
CEN/CLC Guide 12:200X
(2008-06-08)
The concept of Affiliation with CEN and CENELEC
CEN/CLC Guide 13:200X
(2008-06-08)
The concept of Partner Standardization Body with CEN and CENELEC
CEN/CLC Guide 15:200X
(2008-11-01)
Tasks and responsibilities of the New Approach Consultants
CLC/TR 50083-5-1:200X
(2009-03-13)
Cable networks for television signals, sound signals and interactive services -- Part 5-1: IP gateways and interfaces for headends
CLC/TR 50481:200X
(2008-12-25)
Recommendations on filters for shielded enclosures
CLC/TR 50484:200X
(2008-12-25)
Recommendations for shielded enclosures
CLC/TS 50131-2-71:200X
(2009-03-06)
Alarm systems - Intrusion and hold-up systems -- Part 2-7-1: Intrusion detectors - Glass break detectors (acoustics)
CLC/TS 50131-2-72:200X
(2009-03-06)
Alarm systems - Intrusion and hold-up systems -- Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
CLC/TS 50131-2-73:200X
(2009-03-06)
Alarm systems - Intrusion and hold-up systems -- Part 2-7-3: Intrusion detectors - Glass break detectors (active)
CLC/TS 61836:200X (IEC/TS 61836:2007 (EQV))
(2009-01-23)
Solar photovoltaic energy systems - Terms, definitions and symbols
EN 140401:200X
(2009-03-01)
Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
EN 50119:200X
(2009-04-01)
Railway applications - Fixed installations - Electric traction overhead contact lines
EN 50131-3:200X
(2009-02-01)
Alarm systems - Intrusion and hold-up systems -- Part 3: Control and indicating equipment
EN 50131-8:200X
(2009-04-01)
Alarm systems - Intrusion and hold-up systems -- Part 8: Security fog device/systems
EN 50143:200X
(2009-02-01)
Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V
EN 50341-1:2001/AA:200X
(2009-04-01)
Overhead electrical lines exceeding AC 45 kV -- Part 1: General requirements - Common specifications
EN 50377-2-2:200X
(2008-12-01)
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre, with full zirconia ferrule, category C
EN 50468:200X
(2009-02-01)
Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports
EN 50491-3:200X
(2009-03-01)
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 3: Electrical safety requirements
EN 55015:2006/A2:200X (CISPR 15:2005/A2:2008 (EQV))
(2009-03-01)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
EN 55016-2-1:200X (CISPR 16-2-1:2008 (EQV))
(2009-03-01)
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
EN 60034-30:200X (IEC 60034-30:2008 (EQV))
(2009-03-01)
Rotating electrical machines -- Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
EN 60079-10-1:200X (IEC 60079-10-1:2008 (EQV))
(2009-03-01)
Explosive atmospheres -- Part 10-1: Classification of areas - Explosive gas atmospheres
EN 60204-1:2006/A1:200X (IEC 60204-1:2005/A1:2008 (EQV))
(2009-02-01)
Safety of machinery - Electrical equipment of machines -- Part 1: General requirements
EN 60205:2006/A1:200X (IEC 60205:2006/A1:2009 (EQV))
(2009-02-01)
Calculation of the effective parameters of magnetic piece parts
EN 60286-5:2004/A1:200X (IEC 60286-5:2003/A1:2009 (EQV))
(2009-03-01)
Packaging of components for automatic handling -- Part 5: Matrix trays
EN 60335-2-31:2003/A2:200X (IEC 60335-2-31:2002/A2:2008 (EQV))
(2009-03-01)
Household and similar electrical appliances - Safety -- Part 2-31: Particular requirements for range hoods and other cooking fume extractors
EN 60335-2-40:2003/A2:200X (IEC 60335-2-40:2002/A2:2005 (MOD))
(2009-03-01)
Household and similar electrical appliances - Safety -- Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN 60335-2-80:2003/A2:200X (IEC 60335-2-80:2002/A2:2008 (EQV))
(2009-03-01)
Household and similar electrical appliances - Safety -- Part 2-80: Particular requirements for fans
EN 60424-5:200X (IEC 60424-5:2009 (EQV))
(2009-04-01)
Ferrite cores - Guide on the limits of surface irregularities -- Part 5: Planar-cores
EN 60598-2-14:200X (IEC 60598-2-14:2009 (EQV))
(2009-04-01)
Luminaires -- Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment
EN 60601-2-19:200X (IEC 60601-2-19:2009 (EQV))
(2009-04-01)
Medical electrical equipment -- Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
EN 60601-2-2:200X (IEC 60601-2-2:2009 (EQV))
(2009-04-01)
Medical electrical equipment -- Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
EN 60601-2-21:200X (IEC 60601-2-21:2009 (EQV))
(2009-04-01)
Medical electrical equipment -- Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
EN 60669-2-1:2004/A1:200X (IEC 60669-2-1:2002/A1:2008 (EQV))
(2009-04-01)
Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches
EN 60669-2-1:2004/A11:200X
(2009-04-01)
Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches
EN 60689:200X (IEC 60689:2008 (EQV))
(2009-03-01)
Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
EN 60745-1:200X (IEC 60745-1:2006 (MOD))
(2009-03-01)
EN 60745-1:200X
(2009-03-01)
EN 60745-2-12:2003/A1:200X (IEC 60745-2-12:2003/A1:2008 (EQV))
(2009-04-01)
Hand-held motor-operated electric tools - Safety -- Part 2-12: Particular requirements for concrete vibrators
EN 60747-16-3:2002/A1:200X (IEC 60747-16-3:2002/A1:2009 (EQV))
(2009-04-01)
Semiconductor devices -- Part 16-3: Microwave integrated circuits - Frequency converters
EN 60793-2-20:200X (IEC 60793-2-20:2007 (EQV))
(2009-04-01)
Optical fibres -- Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres
EN 60793-2-30:200X (IEC 60793-2-30:2007 (EQV))
(2009-04-01)
Optical fibres -- Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
EN 60794-3-10:200X (IEC 60794-3-10:2009 (EQV))
(2009-04-01)
Optical fibre cables -- Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables
EN 60794-3-20:200X (IEC 60794-3-20:2009 (EQV))
(2009-03-01)
Optical fibre cables -- Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables
EN 60851-3:200X (IEC 60851-3:2009 (EQV))
(2009-04-01)
Winding wires - Test methods -- Part 3: Mechanical properties
EN 60904-7:200X (IEC 60904-7:2008 (EQV))
(2009-03-01)
Photovoltaic devices -- Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices
EN 60966-3:200X (IEC 60966-3:2008 (EQV))
(2009-04-01)
Radio frequency and coaxial cable assemblies -- Part 3: Sectional specification for semi-flexible coaxial cable assemblies
EN 60966-3-1:200X (IEC 60966-3-1:2009 (EQV))
(2009-02-01)
Radio frequency and coaxial cable assemblies -- Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies
EN 60974-8:200X (IEC 60974-8:2009 (EQV))
(2009-03-01)
Arc welding equipment -- Part 8: Gas consoles for welding and plasma cutting systems
EN 61000-4-17:1999/A2:200X (IEC 61000-4-17:1999/A2:2008 (EQV))
(2009-02-01)
Electromagnetic compatibility (EMC) -- Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
EN 61000-4-2:200X (IEC 61000-4-2:2008 (EQV))
(2009-03-01)
Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 61000-4-27:2000/A1:200X (IEC 61000-4-27:2000/A1:2009 (EQV))
(2009-03-01)
Electromagnetic compatibility (EMC) -- Part 4-27: Testing and measurement techniques - Unbalance, immunity test
EN 61000-4-28:2000/A2:200X (IEC 61000-4-28:1999/A2:2009 (EQV))
(2009-03-01)
Electromagnetic compatibility (EMC) -- Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test
EN 61000-4-6:200X (IEC 61000-4-6:2008 (EQV))
(2009-03-01)
Electromagnetic compatibility (EMC) -- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-7:2002/A1:200X (IEC 61000-4-7:2002/A1:2008 (EQV))
(2009-03-01)
Electromagnetic compatibility (EMC) -- Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
EN 61029-1:200X (IEC 61029-1:1990 (MOD))
(2009-03-01)
EN 61029-1:200X
(2009-03-01)
EN 61073-1:200X (IEC 61073-1:2009 (EQV))
(2009-02-01)
Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables -- Part 1: Generic specification
EN 61094-2:200X (IEC 61094-2:2009 (EQV))
(2009-03-01)
Electroacoutstics - Measurement microphones -- Part 2: Primary method for the pressure calibration of laboratory standard microphones by the reciprocity technique
EN 61095:200X (IEC 61095:2009 (EQV))
(2009-03-01)
Electromechanical contactors for household and similar purposes
EN 61169-24:200X (IEC 61169-24:2009 (EQV))
(2009-03-01)
Radio-frequency connectors -- Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F)
EN 61249-2-35:200X (IEC 61249-2-35:2008 (EQV))
(2009-02-01)
Materials for printed boards and other interconnecting structures -- Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-36:200X (IEC 61249-2-36:2008 (EQV))
(2009-02-01)
Materials for printed boards and other interconnecting structures -- Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-37:200X (IEC 61249-2-37:2008 (EQV))
(2009-02-01)
Materials for printed boards and other interconnecting structures -- Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61249-2-38:200X (IEC 61249-2-38:2008 (EQV))
(2009-02-01)
Materials for printed boards and other interconnecting structures -- Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
EN 61280-2-9:200X (IEC 61280-2-9:2009 (EQV))
(2009-04-01)
Fibre optic communication subsystem test procedures -- Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
EN 61290-10-1:200X (IEC 61290-10-1:2009 (EQV))
(2009-04-01)
Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
EN 61300-2-2:200X (IEC 61300-2-2:2009 (EQV))
(2009-02-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-2: Tests - Mating durability
EN 61300-2-48:200X (IEC 61300-2-48:2009 (EQV))
(2009-04-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-48: Tests - Temperature-humidity cycling
EN 61300-3-2:200X (IEC 61300-3-2:2009 (EQV))
(2009-02-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device
EN 61300-3-3:200X (IEC 61300-3-3:2009 (EQV))
(2009-04-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss
EN 61300-3-34:200X (IEC 61300-3-34:2009 (EQV))
(2009-02-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-34: Examinations and measurements - Attenuation of random mated connectors
EN 61300-3-43:200X (IEC 61300-3-43:2009 (EQV))
(2009-04-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
EN 61300-3-6:200X (IEC 61300-3-6:2008 (EQV))
(2009-03-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-6: Examinations and measurements - Return loss
EN 61314-1:200X (IEC 61314-1:2009 (EQV))
(2009-04-01)
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs -- Part 1: Generic specification
EN 61400-3:200X (IEC 61400-3:2009 (EQV))
(2009-04-01)
Wind turbines -- Part 3: Design requirements for offshore wind turbines
EN 61534-22:200X (IEC 61534-22:2009 (EQV))
(2009-04-01)
Powertrack systems -- Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation
EN 61557-11:200X (IEC 61557-11:2009 (EQV))
(2009-02-01)
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 11: Effectiveness of residual current monitors (RCMS) type A and type B in TT, TN and IT systems
EN 61557-9:200X (IEC 61557-9:2009 (EQV))
(2009-02-01)
Electrical safety in low voltage distribution systems up to 1 000 V ac and 1 500 V dc - Equipment for testing, measuring or monitoring of protective measures -- Part 9: Equipment for insulation fault location in IT systems
EN 61558-1:2005/A1:200X (IEC 61558-1:2005/A1:2009 (EQV))
(2009-03-01)
Safety of power transformers, power supplies, reactors and similar products -- Part 1: General requirements and tests
EN 61558-2-13:200X (IEC 61558-2-13:2009 (EQV))
(2009-03-01)
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
EN 61558-2-4:200X (IEC 61558-2-4:2009 (EQV))
(2009-03-01)
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
EN 61643-21:2001/A1:200X (IEC 61643-21:2000/A1:2008 (MOD))
(2009-03-01)
Low voltage surge protective devices -- Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
EN 61676:2002/A1:200X (IEC 61676:2002/A1:2008 (EQV))
(2009-03-01)
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
EN 61753-031-3:200X (IEC 61753-031-3:2009 (EQV))
(2009-04-01)
Fibre optic interconnecting devices and passive components performance standard -- Part 031-3: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category U - Uncontrolled environment
EN 61754-25:200X (IEC 61754-25:2008 (EQV))
(2009-02-01)
Fibre optic connector interfaces -- Part 25: Type RAO connector family
EN 61755-3-7:200X (IEC 61755-3-7:2009 (EQV))
(2009-03-01)
Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces -- Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre
EN 61755-3-8:200X (IEC 61755-3-8:2009 (EQV))
(2009-02-01)
Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces -- Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre
EN 61914:200X (IEC 61914:2009 (EQV))
(2009-04-01)
Cable cleats for electrical installations
EN 61995-2:200X (IEC 61995-2:2009 (EQV))
(2009-04-01)
Devices for the connection of luminaires for household and similar purposes -- Part 2: Standard sheets for DCL
EN 62007-2:200X (IEC 62007-2:2009 (EQV))
(2009-02-01)
Semiconductor optoelectronic devices for fibre optic system applications -- Part 2: Measuring methods
EN 62097:200X (IEC 62097:2009 (EQV))
(2009-03-01)
Hydraulic machines, radial and axial - Performance conversion method from model to prototype
EN 62137-1-3:200X (IEC 62137-1-3:2008 (EQV))
(2009-02-01)
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-3: Cyclic drop test
EN 62137-1-4:200X (IEC 62137-1-4:2009 (EQV))
(2009-02-01)
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-4: Cyclic bending test
EN 62137-1-5:200X (IEC 62137-1-5:2009 (EQV))
(2009-04-01)
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-5: Mechanical shear fatigue test
EN 62271-100:200X (IEC 62271-100:2008 (EQV))
(2009-03-01)
High-voltage switchgear and controlgear -- Part 100: Alternating-current circuit-breakers
EN 62271-109:200X (IEC 62271-109:2008 (EQV))
(2009-03-01)
High-voltage switchgear and controlgear -- Part 109: Alternating-current series capacitor by-pass switches
EN 62271-110:200X (IEC 62271-110:2009 (EQV))
(2009-04-01)
High-voltage switchgear and controlgear -- Part 110: Inductive load switching
EN 62321:200X (IEC 62321:2008 (EQV))
(2009-03-01)
Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
EN 62369-1:200X (IEC 62369-1:2008 (EQV))
(2009-03-01)
Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz -- Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
EN 62419:200X (IEC 62419:2008 (EQV))
(2009-02-01)
Control technology - Rules for the designation of measuring instruments
EN 62496-1:200X (IEC 62496-1:2008 (EQV))
(2009-03-01)
Optical circuit boards -- Part 1: General
EN 80000-14:200X (IEC 80000-14:2008 (EQV))
(2009-04-01)
Quantities and units -- Part 14: Telebiometrics related to human physiology
EN 80416-1:200X (IEC 80416-1:2008 (EQV))
(2009-02-01)
Basic principles for graphical symbols for use on equipment -- Part 1: Creation of graphical symbols for registration
HD 60364-5-51:200X (IEC 60364-5-51:2005 (MOD))
(2009-04-01)
Electrical installations of buildings -- Part 5-51: Selection and erection of electrical equipment - Common rules
HD 60364-7-708:200X (IEC 60364-7-708:2007 (EQV))
(2009-04-01)
Low-voltage electrical installations -- Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
HD 60364-7-708:200X/AA:200X
(2009-04-01)
Low-voltage electrical installations -- Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
HD 60364-7-709:200X (IEC 60364-7-709:2007 (EQV))
(2009-04-01)
Low-voltage electrical installations -- Part 7-709: Requirements for special installations or locations - Marinas and similar locations
HD 60364-7-709:200X/AA:200X
(2009-04-01)
Low-voltage electrical installations -- Part 7-709: Requirements for special installations or locations - Marinas and similar locations
HD 60364-7-721:200X (IEC 60364-7-721:2007 (MOD))
(2009-04-01)
Low-voltage electrical installations -- Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans