Tammi - maaliskuu 2010 (2010-03-31)
CLC/TR 50173-99-2:201X
(2010-01-01)
Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4
CLC/TR 50417:201X
(2009-12-04)
Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series
CLC/TR 62271-208:201X (IEC/TR 62271-208:2009 (EQV))
(2010-03-05)
High-voltage switchgear and controlgear -- Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations
CLC/TS 50544:201X
(2009-12-25)
Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters
EN 45502-2-3:201X
(2010-02-01)
Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
EN 50085-2-3:201X
(2010-03-01)
Cable trunking systems and cable ducting systems for electrical installations -- Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets
EN 50110-2:201X
(2010-03-01)
Operation of electrical installations -- Part 2: National annexes
EN 50132-1:201X
(2010-03-01)
Alarm systems - CCTV surveillance systems for use in security applications -- Part 1: System requirements
EN 50160:201X
(2010-03-01)
Voltage characteristics of electricity supplied by public distribution networks
EN 50397-3:201X
(2010-02-01)
Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. -- Part 3: Guide to use
EN 50491-2:201X
(2010-03-01)
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions
EN 50519:201X
(2010-02-01)
Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment
EN 50527-1:201X
(2010-02-01)
Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices
-- Part 1: General
EN 55016-1-1:201X (CISPR 16-1-1:2010 (EQV))
(2010-03-01)
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
EN 60071-1:2006/A1:201X (IEC 60071-1:2006/A1:2010 (EQV))
(2010-02-01)
Insulation co-ordination -- Part 1: Definitions, principles and rules
EN 60079-20-1:201X (IEC 60079-20-1:2010 (EQV))
(2010-02-01)
Explosive atmospheres -- Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
EN 60081:1998/A4:201X (IEC 60081:1997/A4:2010 (EQV))
(2010-03-01)
Double-capped fluorescent lamps - Performance specifications
EN 60172:1994/A2:201X (IEC 60172:1987/A2:2010 (EQV))
(2010-02-01)
Test procedure for the determination of the temperature index of enamelled winding wires
EN 60191-6-18:201X (IEC 60191-6-18:2010 (EQV))
(2010-02-01)
Mechanical standardization of semiconductor devices -- Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)
EN 60317-15:2004/A1:201X (IEC 60317-15:2004/A1:2010 (EQV))
(2010-03-01)
Specifications for particular types of winding wires -- Part 15: Polyesterimide enamelled round aluminium wire, class 180
EN 60317-18:2004/A1:201X (IEC 60317-18:2004/A1:2009 (EQV))
(2010-02-01)
Specifications for particular types of winding wires -- Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
EN 60317-22:2004/A1:201X (IEC 60317-22:2004/A1:2009 (EQV))
(2010-02-01)
Specifications for particular types of winding wires -- Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
EN 60317-42:1997/A1:201X (IEC 60317-42:1997/A1:2010 (EQV))
(2010-03-01)
Specifications for particular types of winding wires -- Part 42: Polyester-amide-imide enamelled round copper wire, class 200
EN 60335-2-13:201X (IEC 60335-2-13:2009 (EQV))
(2010-02-01)
Household and similar electrical appliances - Safety -- Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
EN 60335-2-2:201X (IEC 60335-2-2:2009 (EQV))
(2010-02-01)
Household and similar electrical appliances - Safety -- Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
EN 60335-2-24:201X (IEC 60335-2-24:2010 (EQV))
(2010-03-01)
Household and similar electrical appliances - Safety -- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN 60335-2-29:2004/A2:201X (IEC 60335-2-29:2002/A2:2009 (EQV))
(2010-02-01)
Household and similar electrical appliances - Safety -- Part 2-29: Particular requirements for battery chargers
EN 60335-2-89:201X (IEC 60335-2-89:2010 (EQV))
(2010-03-01)
Household and similar electrical appliances - Safety -- Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
EN 60691:2003/A2:201X (IEC 60691:2002/A2:2010 (EQV))
(2010-03-01)
Thermal-links - Requirements and application guide
EN 60704-1:201X (IEC 60704-1:2010 (EQV))
(2010-03-01)
Household and similar electrical appliances - Test code for the determination of airborne noise -- Part 1: General requirements
EN 60728-13:201X (IEC 60728-13:2010 (EQV))
(2010-02-01)
Cable networks for television signals, sound signals and interactive services -- Part 13: Optical systems for broadcast signal transmissions
EN 60730-2-15:201X (IEC 60730-2-15:2008 (MOD))
(2010-03-01)
Automatic electrical controls for household and similar use -- Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
EN 60730-2-5:2002/A2:201X (IEC 60730-2-5:2000/A2:2008 (MOD))
(2010-03-01)
Automatic electrical controls for household and similar use -- Part 2-5: Particular requirements for automatic electrical burner control systems
EN 60745-2-1:2003/AE:201X
(2010-02-01)
Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for drills and impact drills
EN 60745-2-11:2003/AD:201X
(2010-02-01)
Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
EN 60745-2-2:2003/AD:201X
(2010-02-01)
Hand-held motor-operated electric tools - Safety -- Part 2-2: Particular requirements for screwdrivers and impact wrenches
EN 60745-2-6:2003/AD:201X
(2010-02-01)
Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
EN 60832-1:201X (IEC 60832-1:2010 (EQV))
(2010-03-01)
Live working - Insulating sticks and attachable devices -- Part 1: Insulating sticks
EN 60832-2:201X (IEC 60832-2:2010 (EQV))
(2010-03-01)
Live working - Insulating sticks and attachable devices -- Part 2: Attachable devices
EN 60904-10:201X (IEC 60904-10:2009 (EQV))
(2010-03-01)
Photovoltaic devices -- Part 10: Methods of linearity measurement
EN 60909-3:201X (IEC 60909-3:2009 (EQV))
(2010-03-01)
Short-circuit currents in three-phase a.c systems -- Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
EN 60950-1:2006/A1:201X (IEC 60950-1:2005/A1:2009 (EQV))
(2010-03-01)
Information technology equipment - Safety -- Part 1: General requirements
EN 60964:201X (IEC 60964:2009 (EQV))
(2010-03-01)
Nuclear power plants - Control rooms - Design
EN 60974-9:201X (IEC 60974-9:2010 (EQV))
(2010-03-01)
Arc welding equipment -- Part 9: Installation and use
EN 61000-4-4:2004/A1:201X (IEC 61000-4-4:2004/A1:2010 (EQV))
(2010-03-01)
Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
EN 61000-4-8:201X (IEC 61000-4-8:2009 (EQV))
(2010-02-01)
Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
EN 61097-14:201X (IEC 61097-14:2010 (EQV))
(2010-03-01)
Global maritime distress and safety system (GMDSS) -- Part 14: AIS Search And Rescue Transmitter (AIS-SART) - Operational and performance requirements, methods of testing and required test results
EN 61226:201X (IEC 61226:2009 (EQV))
(2010-03-01)
Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
EN 61300-2-21:201X (IEC 61300-2-21:2009 (EQV))
(2010-02-01)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-21: Tests - Composite temperature/humidity cyclic test
EN 61753-111-7:201X (IEC 61753-111-7:2009 (EQV))
(2010-02-01)
Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for category A - Aerial
EN 61753-111-8:201X (IEC 61753-111-8:2009 (EQV))
(2010-02-01)
Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground
EN 61753-111-9:201X (IEC 61753-111-9:2009 (EQV))
(2010-02-01)
Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean
EN 61850-6:201X (IEC 61850-6:2009 (EQV))
(2010-02-01)
Communication networks and systems for power utility automation -- Part 6: Configuration description language for communication in electrical substations related to IEDs
EN 61907:201X (IEC 61907:2009 (EQV))
(2010-02-01)
Communication network dependability engineering
EN 61978-1:201X (IEC 61978-1:2009 (EQV))
(2010-03-01)
Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators -- Part 1: Generic specification
EN 62115:2005/IS1:201X
(2009-11-25)
Electric toys - Safety * Interpretation of Clause 18 of EN 62115:2005
EN 62148-15:201X (IEC 62148-15:2009 (EQV))
(2010-02-01)
Fibre optic active components and devices - Package and interface standards -- Part 15: Discrete vertical cavity surface emitting laser packages
EN 62333-3:201X (IEC 62333-3:2010 (EQV))
(2010-02-01)
Noise suppression sheet for digital devices and equipment -- Part 3: Characterization of parameters of noise suppression sheet
EN 62439-1:201X (IEC 62439-1:2010 (EQV))
(2010-03-01)
Industrial communication networks - High availability automation networks -- Part 1: General concepts and calculation methods
EN 62439-2:201X (IEC 62439-2:2010 (EQV))
(2010-03-01)
Industrial communication networks - High availability automation networks -- Part 2: Media Redundancy Protocol (MRP)
EN 62439-3:201X (IEC 62439-3:2010 (EQV))
(2010-03-01)
Industrial communication networks - High availability automation networks -- Part 3: Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR)
EN 62439-4:201X (IEC 62439-4:2010 (EQV))
(2010-03-01)
Industrial communication networks - High availability automation networks -- Part 4: Cross-network Redundancy Protocol (CRP)
EN 62439-5:201X (IEC 62439-5:2010 (EQV))
(2010-03-01)
Industrial communication networks - High availability automation networks -- Part 5: Beacon Redundancy Protocol (BRP)
EN 62439-6:201X (IEC 62439-6:2010 (EQV))
(2010-03-01)
Industrial communication networks - High availability automation networks -- Part 6: Distributed Redundancy Protocol (DRP)
EN 62493:201X (IEC 62493:2009 (EQV))
(2010-02-01)
Assessment of lighting equipment related to human exposure to electromagnetic fields
EN ISO/IEC 17050-1:201X (ISO/IEC 17050-1:2007 (CORRECTED VERSION OF ISO/IEC 17050-1:2004) (EQV))
(2010-03-13)
Conformity assessment - Supplier's declaration of conformity -- Part 1: General requirements
HD 60364-4-43:201X (IEC 60364-4-43:2008 (EQV) + corrigendum Oct. 2008 (EQV))
(2010-03-01)
Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent